Abstract:Zwitterionic polysulfone (PSf) ultrafiltration membranes were fabricated by non-solvent phase separation (NIPS) method. Herein, a casting solution at 45 °C was developed by using chloromethylated polysulfone (CMPSf), N, N-dimethylacetamide (DMAc) as a solvent, 4-amino-benzenesulfonic acid monosodium salt (ABS) as a cross-linking agent, and Na 2 CO 3 as an acid binder. Simultaneously, the occurrence of the electrophilic substitution reaction between ABS and CMPSf caused the formation of ABS grafting CMPSf (CMPSf-g-ABS). After a specific reaction time, the casting solution was applied to cast membranes, which were subsequently submerged in coagulation bath. A zwitterionic ultrafiltration (ZUF) membrane was obtained using NIPS following the treatment of hydrochloric acid (HCl) solution (1 M mol). Because of the formation of cross-linked CMPSf-g-ABS, the results revealed that the casting solution's viscosity increased sharply from 425.4 mPa s at the initial stage (0 h) to 4810.8 mPa s (22 h). Interestingly, the morphology of the membranes with an asymmetric finger-like structure at 0 h gradually transformed to a gradient sponge-like structure after 22 h. Specifically, the ZUF membrane (M22-H) with the gel fraction of 72.1% procured after the reaction of 22 h demonstrated a low water contact angle (40.17°) and a high pure water permeance (420.4 L m −2 h −1 bar −1 ). The M22-H also exhibited a high flux recovery rate (FRR) (90.2%), bovine serum albumin (BSA) rejection (>95%), and Escherichia coli ( E. coli ) antibacterial rate (96.2%). The surface of the ZUF membrane with numerous zwitterionic groups enhances the hydration layer's energy (i region 16 nm), causing a significant improvement in the antifouling performance. This research opens new avenues for preparing zwitterionic functional membranes.

A novel polysulfate hollow fiber membrane with antifouling property for ultrafiltration application

A comprehensive study on phase inversion behavior of a novel polysulfate membrane for high-performance ultrafiltration applications

The construction of polysulfate membrane with improved ultrafiltration performance via zwitterionic copolymer segregation

Pregelation of Sulfonated Polysulfone and Water for Tailoring the Morphology and Properties of Polyethersulfone Ultrafiltration Membranes for Dye/salt Selective Separation

A Novel Polysulfone Ultrafiltration Membrane Constructed with the Sandwich-Like Structure Sgo-Zno for Ultra-Easy Water Transport and Enhanced Anti-Fouling

Zwitterionic Polysulfone Copolymer/Polysulfone Blended Ultrafiltration Membranes with Excellent Thermostability and Antifouling Properties

Preparation of a Novel Sulfonated Polyphenlene Sulfone with Flexible Side Chain for Ultrafiltration Membrane Application

Preparation of pH-responsive asymmetric polysulfone ultrafiltration membranes with enhanced anti-fouling properties and performance by incorporating poly(2-ethyl-2-oxazoline) additive

Preparation of Antifouling Ultrafiltration Membranes from Copolymers of Polysulfone and Zwitterionic Poly(arylene Ether Sulfone)s

Slow Hydrophobic Hydration Induced Polymer Ultrafiltration Membranes with High Water Flux

Preparation of novel zwitterionic polysulfone ultrafiltration membranes for the dual-enhanced antifouling and antibacterial properties by in-situ one pot crosslinking reaction

A Novel Antifouling and Thermally Stable Polysulfone Ultrafiltration Membranes with Sulfobetaine Polyimide As Porogen

Fabrication of ultrafiltration membranes with enhanced antifouling capability and stable mechanical properties via the strategies of blending and crosslinking

Zwitterionic Polyethersulfone Ultrafiltration Membrane with Superior Antifouling Property

Improved Antifouling Properties of Poly(Ether Sulfone) Membrane by Incorporating the Amphiphilic Comb Copolymer with Mixed Poly(Ethylene Glycol) and Poly(Dimethylsiloxane) Brushes

A Polyethersulfone–bisphenol Sulfuric Acid Hollow Fiber Ultrafiltration Membrane Fabricated by a Reverse Thermally Induced Phase Separation Process

Fabrication of ultrafiltration membranes based on methacrylate copolymers containing quaternary ammonium and PEG units for dye removal

Hollow Mesoporous Silica Spheres/polyethersulfone Composite Ultrafiltration Membrane with Enhanced Antifouling Property

Synthesis of sulfonated polyphenylsulfone as candidates for antifouling ultrafiltration membrane

Fabrication of polysulfone ultrafiltration membranes of a density gradient cross section with good anti-pressure stability and relatively high water flux

Preparation and Characterization of Novel Zwitterionic Poly(arylene Ether Sulfone) Ultrafiltration Membrane with Good Thermostability and Excellent Antifouling Properties