Improved Protein Removal Performance of PES Hollow-Fiber Ultrafiltration Membrane with Sponge-like Structure

Huyang Zhao,Ting He,Shuang Yao,Long Tao,Xinhai Zhang,Zhaohui Wang,Zhaoliang Cui,Rizhi Chen

DOI: https://doi.org/10.3390/polym16091194

IF: 5

2024-04-25

Polymers

Abstract:The research used polyethersulfone (PES) as a membrane material, polyvinylpyrrolidone (PVP) k30 and polyethylene glycol 400 (PEG 400) as water-soluble additives, and dimethylacetamide (DMAc) as a solvent to prepare hollow-fiber ultrafiltration membranes through a nonsolvent-induced phase separation (NIPS) process. The hydrophilic nature of PVP-k30 and PEG caused them to accumulate on the membrane surface during phase separation. The morphology, chemical composition, surface charge, and pore size of the PES membranes were evaluated by SEM, FTIR, zeta potential, and dextran filtration experiments. The paper also investigated how different spinning solution compositions affected membrane morphology and performance. The separation efficiency of membranes with four different morphologies was tested in single-protein and double-protein mixed solutions. The protein separation effectiveness of the membrane was studied through molecular weight cutoff, zeta potential, and static protein adsorption tests. In addition, the operating pressure and pH value were adjusted to improve ultrafiltration process conditions. The PES membrane with an intact sponge-like structure showed the highest separation factor of 11, making it a prime candidate membrane for the separation of bovine serum albumin (BSA) and lysozyme (LYS). The membrane had a minimal static protein adsorption capacity of 48 mg/cm2 and had excellent anti-fouling properties. When pH = 4, the BSA retention rate was 93% and the LYS retention rate was 23%. Furthermore, it exhibited excellent stability over a pH range of 1–13, confirming its suitability for protein separation applications.

polymer science

What problem does this paper attempt to address?

The paper aims to address issues in the protein separation process, particularly the problems of protein denaturation and hydrolysis in traditional protein separation and purification techniques (such as extraction, precipitation, and centrifugation), as well as the challenge of selecting appropriate centrifugation resolution. The paper improves protein removal performance by preparing polyethersulfone (PES) hollow fiber ultrafiltration membranes with a sponge-like structure.

Specifically, the research team used polyethersulfone (PES) as the membrane material and added polyvinylpyrrolidone (PVP) K30 and polyethylene glycol 400 (PEG 400) as hydrophilic additives. Using dimethylacetamide (DMAc) as the solvent, they prepared hollow fiber ultrafiltration membranes through the non-solvent induced phase separation (NIPS) process. These hydrophilic additives accumulate on the membrane surface during phase separation, thereby improving the membrane's hydrophilicity and reducing protein adsorption. The study also explored the effects of different spinning solution compositions on membrane morphology and performance, and tested the separation efficiency of four different morphologies of membranes in single-protein and dual-protein mixed solutions.

Ultimately, the research showed that PES membranes with a complete sponge-like structure had the highest separation factor (11), making them ideal candidate membranes for separating bovine serum albumin (BSA) and lysozyme (LYS). Additionally, the membrane exhibited good stability at a pH of 4, with a BSA retention rate of 93% and an LYS retention rate of 23%, and demonstrated excellent stability within a pH range of 1-13, making it suitable for protein separation applications.