Abstract:Although polyethersulfone (PES) membranes are extensively utilized in water and wastewater treatment, they typically encounter serious bio/organic fouling problems. In this work, an antimicrobial and antifouling PES membrane was developed through incorporating novel ZnO/PHMB (zinc oxide/ polyhexamethylene biguanide hydrochloride) nanocomposites on the surface of a commercial PES membrane, with PDA (polydopamine) serving as an intermediate connection layer. XPS, along with synchrotron-based XRF and ATR-FTIR results confirmed the successful synthesis of the ZnO/PHMB nanocomposites and ZnO/PHMB membranes. The ZnO/PHMB nanocomposites exhibited an impressive antimicrobial rate of 99.99 % with a minimal amount of PHMB addition (wt ZnO :wt PHMB = 1:0.01). The concentration of the ZnO/PHMB nanocomposites had the most significant impact on the antimicrobial performance of the ZnO/PHMB membrane. The 600ZP membrane (i.e., the PES membrane modified with 600 mg/L ZnO/PHMB nanocomposites) emerged as the optimal choice, as evidenced by its commendable antimicrobial performance (92.80 %), water flux (249.02 LMH), RB (Rose Bengal sodium salt) rejection (93.96 %), and cost-benefit considerations. Compared to the pristine PES membrane, the 600ZP membrane showed 5.32 %, 15.76 %, and 7.62 % increased hydrophilicity, water flux, and RB rejection rate, respectively. Additionally, the 600ZP membrane possessed a bactericidal rate of 92.80 % and a flux recovery rate of 89.24 % after three cycles of SA (sodium alginate) filtration, indicating enhanced antimicrobial and antifouling capacities. The 600ZP membrane exhibited a remarkable 91.05 % higher water flux following prolonged (72 h) treatment of secondary effluent, compared to the PES membrane. Attribute to the increased hydrophilicity, outstanding antimicrobial activity, as well as excellent stability and durability, the as-prepared ZnO/PHMB membrane shows great potential for wastewater treatment.

Polyethersulfone membrane modified by zwitterionic groups for improving anti-fouling and antibacterial properties

Anti-Fouling and Anti-Bacterial Polyethersulfone Membranes Quaternized from the Additive of Poly(2-Dimethylamino Ethyl Methacrylate) Grafted Sio2 Nanoparticles

Zwitterionic Glycosyl Modified Polyethersulfone Membranes with Enhanced Anti-Fouling Property and Blood Compatibility

Development of an antimicrobial and antifouling PES membrane with ZnO/poly(hexamethylene biguanide) nanocomposites incorporation

Development of Polyethersulfone/α-Zirconium phosphate (PES/α-ZrP) flat-sheet nanocomposite ultrafiltration membranes

Improved Antifouling Properties of Poly(Ether Sulfone) Membrane by Incorporating the Amphiphilic Comb Copolymer with Mixed Poly(Ethylene Glycol) and Poly(Dimethylsiloxane) Brushes

Engineering High-Effective Antifouling Polyether Sulfone Membrane with P(Peg-Pdms-Kh570)@Sio2 Nanocomposite Via In-Situ Sol-Gel Process

Zwitterionic Polyethersulfone Ultrafiltration Membrane with Superior Antifouling Property

One-step Synthesis of Zwitterionic Polyethersulfone Ultrafiltration Membranes Crosslinked by BSA

Versatile Antifouling Polyethersulfone Filtration Membranes Modified Via Surface Grafting of Zwitterionic Polymers from a Reactive Amphiphilic Copolymer Additive.

Enhancing the Antifouling and Antimicrobial Properties of Poly(ether sulfone) Membranes by Surface Quaternization from a Reactive Poly(ether sulfone) Based Copolymer Additive

Improving Permeability and Antifouling Performance of Polyethersulfone Ultrafiltration Membrane by Incorporation of ZnO-DMF Dispersion Containing Nano-Zno and Polyvinylpyrrolidone

Zwitterionic Hydrogel Thin Films As Antifouling Surface Layers of Polyethersulfone Ultrafiltration Membranes Anchored Via Reactive Copolymer Additive

Preparation and Characterization of Novel Zwitterionic Poly(arylene Ether Sulfone) Ultrafiltration Membrane with Good Thermostability and Excellent Antifouling Properties

Protein fouling resistant membrane prepared by amphiphilic pegylated polyethersulfone.

Effects of a dual functional filler, polyethersulfone-g-carboxymethyl chitosan@MWCNT, for enhanced antifouling and penetration performance of PES composite membranes

Low-fouling PES Membranes Fabricated Via in Situ Copolymerization Mediated Surface Zwitterionicalization

Improvement of Antifouling and Antibacterial Properties of Poly(ether Sulfone) UF Membrane by Blending with a Multifunctional Comb Copolymer

Improving the hydrophilicity and fouling-resistance of polysulfone ultrafiltration membranes via surface zwitterionicalization mediated by polysulfone-based triblock copolymer additive

Multifunctional porous materials with simultaneous high water flux, antifouling and antibacterial performances from ionic liquid grafted polyethersulfone

Preparation of novel zwitterionic polysulfone ultrafiltration membranes for the dual-enhanced antifouling and antibacterial properties by in-situ one pot crosslinking reaction