Abstract:Membrane biofouling, adhesion of microorganisms on the surface and the subsequent formation of a biofilm, remains a persistent and inevitable issue, which results in a dramatic reduction of permeability and lifespan. Constructing a membrane with active bacteria-killing and passive anti-adhesion properties is still a challenge to mitigate membrane biofouling. Herein, an active-passive anti-biofouling membrane was originally fabricated by integration of hydrophilic hyperbranched poly(N-acryloylmorpholine) (HPA) and the dimethylaminoethyl acrylate-dodecylammonium bromide (DD) quaternary ammonium compound. Inspired by modern dopamine biomimetic adhesion chemistry, thiolated HPA was first immobilized on the polydopamine (PD)-modified poly(vinylidene fluoride) membrane surface through Michael addition, followed by conjugation of DD via a thiol-ene click reaction. The membrane surface changes of the chemical structure, hydrophilicity, and zeta potential proved that bacteria-killing DD and the anti-adhesion HPA layer were successively conjugated. The initial contact angle of the M-PD/HPA/DD membrane was reduced from 120.5 degrees for the pure membrane to 52.3 degrees. Furthermore, the water flux of the M-PD/HPA/DD membrane increased from 318.9 L m(-2) h(-1) (0.02 MPa) for the pure membrane to 854.4 L m(-2) h(-1). In addition, the M-PD/HPA/DD membrane exhibited excellent active bacteria-killing property with inhibition rates of similar to 90% for Escherichia coli and similar to 95% for Staphylococcus aureus, respectively. Meanwhile, in the filtration of artificial bacteria wastewater, the M-PD/HPA/DD membrane showed a higher water flux recovery rate of 86.9% than 43.3% for the pure membrane, indicating an excellent anti-biofouling property. Therefore, this molecular-level design approach for the modification of the membrane surface could significantly enhance permeability and mitigate membrane biofouling, which provides a promising dimension for the preparation of the anti-biofouling membrane.

Antifouling and Antibacterial Behavior of Membranes Containing Quaternary Ammonium and Zwitterionic Polymers

Preparation and Performance of Quaternary Ammonium Salt-Containing Methacrylate Copolymer-Based Ultrafiltration Membranes

Improved Antifouling Properties of Polyvinyl Chloride Blend Membranes by Novel Phosphate Based-Zwitterionic Polymer Additive

Zwitterion-like, Charge-Balanced Ultrathin Layers on Polymeric Membranes for Antifouling Property.

Polyvinylidene Fluoride Membrane Blended with Quaternary Ammonium Compound for Enhancing Anti-Biofouling Properties: Effects of Dosage

Surface Modification of Polyvinylidene Fluoride Membrane by Atom-Transfer Radical-Polymerization of Quaternary Ammonium Compound for Mitigating Biofouling

Modification of Polyvinylidene Fluoride Membrane by Quaternary Ammonium Compounds Loaded on Silica Nanopollens for Mitigating Biofouling

Membrane Biofouling Control Using Polyvinylidene Fluoride Membrane Blended with Quaternary Ammonium Compound Assembled on Carbon Material

Molecular design of antifouling ultrafiltration membranes via copolymerization of bactericidal and hydrophilic polymers

Characterization of Antibiofouling Behaviors of PVDF Membrane Modified by Quaternary Ammonium Compound – Combined Use of QCM-D, FCM, and CLSM

Antibiofouling Polyvinylidene Fluoride Membrane Modified by Quaternary Ammonium Compound: Direct Contact-Killing Versus Induced Indirect Contact-Killing

Modification of microfiltration membranes by alkoxysilane polycondensation induced quaternary ammonium compounds grafting for biofouling mitigation

Improved Permeability and Biofouling Resistance of Microfiltration Membranes Via Quaternary Ammonium and Zwitterion Dual-Functionalized Diblock Copolymers

Rapid and Robust Modification of PVDF Ultrafiltration Membranes with Enhanced Permselectivity, Antifouling and Antibacterial Performance

Membrane Biofouling Control by Surface Modification of Quaternary Ammonium Compound Using Atom-Transfer Radical-Polymerization Method with Silica Nanoparticle as Interlayer

Integration of a Hydrophilic Hyperbranched Polymer and a Quaternary Ammonium Compound to Mitigate Membrane Biofouling

High Performance Polyvinylidene Fluoride Membrane Functionalized with Poly(ionic Liquid) Brushes for Dual Resistance to Organic and Biological Fouling

Antifouling modification of PVDF membranes via incorporating positive-charge tuned quaternized chitosan magnetic particles

Novel Organic-Inorganic Hybrid Polyvinylidene Fluoride Ultrafiltration Membranes with Antifouling and Antibacterial Properties by Embedding N-halamine Functionalized Silica Nanospheres

Engineering polyamide nanofiltration membrane with bifunctional terpolymer brushes for antifouling and antimicrobial properties

Fabrication and Characterization of Polyvinylidene Fluoride/zinc Oxide Membranes with Antibacterial Property