Abstract:A zwitterionic polymer, poly(3-(methacryloylamino) propyl-dimethyl-(3-sulfopropyl) ammonium hydroxide) (poly(MPDSAH)) was successfully grafted in high density from the surface of poly(vinylidene fluoride) (PVDF) hollow fiber membrane via a two-step polymerization. Poly(2-hydroxyethyl methacrylate) (poly(HEMA)) chains were firstly grafted from outside surface of PVDF membrane through atom transfer radical polymerization (ATRP) to provide the initiation sites for subsequent cerium (Ce (IV))-induced graft copolymerization of polyMPDSAH in the presence of N,N′-ethylene bisacrylamide (EBAA) as a cross-linking agent. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) confirmed that the EBAA could stimulate zwitterionic polymers grafting onto the membrane surface. The dense poly(MPDSAH) layers on the PVDF membrane surface were revealed by the scanning electron microscope (SEM). The mechanical property of PVDF membrane was improved by the zwitterionic surface layers. The gravimetry results indicated the grafting amount increased to 520μg/cm2 for a copolymerization time of more than 3h. Static and dynamic water contact angle measurements showed that the surface hydrophilicity of the PVDF membranes was significantly enhanced. As the grafting amount reached 513μgcm−2, the value of contact angle dropped to 22.1° and the amount of protein adsorption decreased to zero. The cyclic experiments for BSA solution filtration demonstrated that the extent of protein fouling was significantly reduced and most of the fouling was reversible. The grafted polymer layer on the PVDF membrane showed a good stability during the membrane cleaning process. The experimental results concluded a good prospect in obtaining the sulfobetaine-modified PVDF membranes with high mechanical strength, good anti-protein-fouling performance, and long-term stability via the two-step polymerization.

Synthesis of Well-Defined PVDF-Based Amphiphilic Block Copolymer via Iodine Transfer Polymerization for Antifouling Membrane Application

Antifouling and Antibacterial Behavior of Membranes Containing Quaternary Ammonium and Zwitterionic Polymers

Modification of Porous Poly(Vinylidene Fluoride) Membrane Using Amphiphilic Polymers with Different Structures in Phase Inversion Process

Improved Antifouling Properties of Polyvinyl Chloride Blend Membranes by Novel Phosphate Based-Zwitterionic Polymer Additive

Improving Hydrophilicity And Protein Resistance Of Poly(Vinylidene Fluoride) Membranes By Blending With Amphiphilic Hyperbranched-Star Polymer

Fundamental and application of amphiphilic copolymers in high performance MF/UF membranes

Simple and Effective Preparation of Zwitterionic Anti‐Fouling Poly(vinylidene fluoride) Ultrafiltration Membrane by In Situ Cross‐Linking Polymerization Technology

Cyclodextrin-modified PVDF membranes with improved anti-fouling performance

Molecular design of antifouling ultrafiltration membranes via copolymerization of bactericidal and hydrophilic polymers

Preparation and Characterization of an Amphiphilic Polyamide Nanofiltration Membrane with Improved Antifouling Properties by Two-Step Surface Modification Method

Enhanced Permeability and Fouling-Resistant Capacity of Poly(vinylidene Fluoride) Ultrafiltration Membrane Based on the PPG-co-PEG-co-PPG Copolymer with Two Hydrophobic Terminals and One Hydrophilic Intermediate.

Improved protein fouling resistance of PVDF membrane grafted with the polyampholyte layers

A novel method to immobilize zwitterionic copolymers onto PVDF hollow fiber membrane surface to obtain antifouling membranes

Synthesis of amphiphilic functional terpolymers towards preparation of high flux, anti-fouling, micropollutant-capturing ultrafiltration membranes

Development of low-fouling PVDF membranes blended with poly(2-methoxyethyl acrylate) via NIPS process

Highly Effective Anti-Organic Fouling Performance of a Modified PVDF Membrane Using a Triple-Component Copolymer of P(Stx-co-MAAy)-g-fPEGz as the Additive

Significantly enhanced antifouling and separation capabilities of PVDF membrane by synergy of semi-interpenetrating polymer and TiO2 gel nanoparticles

High Performance Polyvinylidene Fluoride Membrane Functionalized with Poly(ionic Liquid) Brushes for Dual Resistance to Organic and Biological Fouling

Improved hydrophilicity and antifouling performances of PVDF ultrafiltration membrane via in situ cross-linking

Surface modification of a PVDF membrane by co‐grafting hydroxyl and zwitterionic polymers to enhance wettability and antifouling property

Zwitterionic Sulfobetaine-Grafted Poly(vinylidene Fluoride) Membrane Surface with Stably Anti-Protein-fouling Performance Via a Two-Step Surface Polymerization