Abstract:Methanol is a very valuable chemical with a variety of uses, either as a fuel or as building block for the synthesis of other chemicals. In the last years, interest was growing in the production of methanol from CO2, based on the so called “Power-to-Fuel” concept. In this research, an equilibrium analysis of a methanol reactor with pure CO2 and H2 in the feeding stream was developed. Three novel reactor configurations at equilibrium conditions were considered: once-through reactor, reactor with recycle of unconverted gases after separation of methanol and water by condensation; reactor equipped with membrane permeable to water. An additional important feature of this work was the development of a methodology that assists in comparison of different process schemes by simulation of two different methanol plants configurations in ChemCad®. An adiabatic kinetic reactor with recycle of unconverted gases was considered and simulated in Aspen Plus®, while the performance of a methanol reactor with heat exchange at the pipe wall was simulated in MATLAB. Results show that at equilibrium conditions a reactor with the recycle of unconverted gases ensures the highest CO2 conversion: 69% at 473 K and 55 bar. In addition, the use of pure CO2 and H2 in the feeding stream allows an overall reaction enthalpy change lower than that obtained by the use of syngas in the feed. The kinetic simulation of the methanol reactor in MATLAB showed that axial dispersion phenomena are negligible and the effect of the global heat exchange coefficient on reactor performance is less important than the effect of isothermal heat exchange fluid temperature.

CFD Simulation and Heat Transfer Optimization of Methanol Reactor

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Simulation of multi-fluidized-bed in series for methanol to olefins

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Cfd Modeling of Methanol to Olefins Process in A Fixed-Bed Reactor

Methanol production by CO2 hydrogenation: Analysis and simulation of reactor performance

Application of Filtered Model for Reacting Gas–Solid Flows and Optimization in a Large-Scale Methanol-to-Olefin Fluidized-Bed Reactor

3D Numerical Simulation of a Large Scale MTO Fluidized Bed Reactor

CFD–DEM Modeling of Gas–solid Flow and Catalytic MTO Reaction in a Fluidized Bed Reactor

Three-Dimensional Computation Fluid Dynamics Simulation of CO Methanation Reactor with Immersed Tubes

The Simulation of an Industrial Fixed Bed Reactor for Methanol Dehydration to Dimethyl Ether

Optimization of methane catalytic decomposition in a fluidized bed reactor: A computational approach

Modeling, optimization and operability analysis of Lurgi and Haldor Topsøe methanol synthesis reactors

Optimization of Methanol Reactor with Decreasing Catalyst Activity

Reactive Simulation of Industrial Methanol-to-olefins Fluidized Bed Reactors and Parameter Analysis

CFD Simulation of a SCWO Reactor Containing a Hydrothermal Flame

Simulation of a Large Methanol-to-olefins Fluidized Bed Reactor with Consideration of Coke Distribution

Mathematical Simulation of Methanol Synthesis in a Slurry Reactor

CFD Simulation of an Industrial MTO Fluidized Bed by Coupling a Population Balance Model of Coke Content

Speeding Up CFD Simulation of Fluidized Bed Reactor for MTO by Coupling CRE Model

Computational Fluid Dynamics Simulation of a High-Throughput Catalytic Fixed-Bed Reactor for Total Oxidation of Methane