Abstract:Many coagulants such as aluminium sulfate, ferric sulfate, and ferrous sulfate have been investigated in the past, but there is a lack of data on their effectiveness to some specific water quality parameters. This study aimed at investigating the efficiency of the coagulation water treatment process to remove pollutants such as total organic carbon (TOC), total nitrogen (TN), and total suspended solids (TSS) from urban drinking water. The polyaluminium chloride (PAC) coagulant was applied to determine the impact of the treatment process on the structure and diversity of these pollutants in urban drinking water. All water samples were collected from the Yangtze River, Baoshan district, Shanghai, China, over a period of three months which coincided with the late summer and early winter periods. Specific to different coagulant characterizations, a preliminary test was performed with three other coagulants, namely, aluminium sulfate, polyaluminium, silicate sulfate, and ferric sulfate to determine their optimal conditions for floc characterization and removal efficiencies. In summary, the overall performance of the PAC coagulant was better than that of the other three coagulants used in the pre-treatment of the sampled water. The obtained results revealed that under the optimum operating conditions, the doses of the PAC were as follows: 20, 35, 50, 65, and 80 mgL−1, respectively. The water temperature and pH were determined by using a pH meter, the TOC and TN determined by using a TOC analyzer, and the TSS by following the ASTM D2540 method. Furthermore, the response surface methodology by the Box–Behnken optimization analysis was applied to coagulant dosage, temperature, pH, and three corresponding dependent factors (TSS, TOC, and TN) to determine the best optimal conditions for the PAC performance. To determine whether or not the quadratic model adequately explained and predicted the response during the coagulation process, an analysis of variance was performed. Multiple optimal factors were identified for the urban drinking water treatment, including a pH value of 6.9, water temperature of 20.1 °C, and a coagulant dosage of 9.7 mgL−1.

Application of Response Surface Methodology to Optimize Coagulation Treatment Process of Urban Drinking Water Using Polyaluminium Chloride

Organic pollutants removal of seriously polluted urban water body by coagulation-flocculation process in Shanghai, China

Response Surface Methodology Approach to Optimize Parameters for Coagulation Process Using Polyaluminum Chloride (PAC)

Multiple Response Optimization of the Coagulation Process for Upgrading the Quality of Effluent from Municipal Wastewater Treatment Plant

Study on Coagulation Characteristics of Drinking Water Sources in Upper Yangtze River

Optimization of Coagulation–flocculation Process for Combined Sewer Overflow Wastewater Treatment Using Response Surface Methodology

Coagulation efficiency and removal mechanism for composite coagulant polyaluminium chloride/polydimethyldiallylammonium chloride in treating lightly micro-polluted raw water of Yangtze River in autumn

Optimization of Preparation and Application of Polymeric Aluminum Ferric Sulfate Coagulant by Response Surface Analysis

Optimization of pre-oxidation enhanced coagulation for micro-polluted water treatment by response surface method

Optimization of Coagulation–flocculation Process for Papermaking-Reconstituted Tobacco Slice Wastewater Treatment Using Response Surface Methodology

Optimization of the Coagulation-Flocculation Process for Pulp Mill Wastewater Treatment Using a Combination of Uniform Design and Response Surface Methodology

Optimization of coagulation–flocculation process for a paper-recycling wastewater treatment using response surface methodology

Optimization of coagulation removal of fluoride ions from mine wastewater by polyaluminum chloride based on response surface methodology

Application of Response Surface Methodology For Modeling and Optimization of A Bio Coagulation Process (Sewage Wastewater Treatment Plant)

Optimization of Magnetic Coagulation Process for River Water Treatment Using the Response Surface Method

Optimization of Magnetic-Seeding Coagulation in Artificially Polluted Surface Water Treatment by Response Surface Methodology

Application research on high turbidity raw water in summer western mountainous cities by using composite coagulants of PAC-PDM

Application Research on Treatment of Micro-Polluted Raw Water in Winter Western Mountainous Cities Using Composite Coagulants of PAC-PDM

Notice of Retraction: Optimization of Coagulation-Flocculation Conditions for the Treatment of Combined Sewer Overflow Wastewater

Optimization and Modeling of Coagulation-Flocculation to Remove Algae and Organic Matter from Surface Water by Response Surface Methodology