Abstract:Abstract Coagulation and flocculation are an essential component of both the treatment of drinking water and the treatment of wastewater. The coagulant is one of the materials or substances that is added to the water to remove, stabilizes and causes colloidal particles to settle. Chemical coagulants such as aluminum sulphate (alum), ferric chloride, and synthetic polymers are the most commonly used coagulants in the industry due to their efficacy in turbidity removal. However, the use of chemical-based coagulants has had some negative impacts on human health and the environment, such as Alzheimer’s disease, and has produced a high volume of toxic sludge. In order to reduce negative impacts, this led to the discovery of an alternative to the natural coagulant (plant-based) for drinking water treatment. The coagulant used in this study is a combination of fruit waste containing citrus microcarpa peels and papaya seed with a ratio of 80:20 and 40:60. In addition to determining the potential of the composite natural coagulant, the optimal dosage and the effect of the mixing duration are also studied in order to determine the best mixing duration for each stage of the coagulation-flocculation process. Laboratory-scale studies using jar test experiments were conducted on surface water to determine the percentage of turbidity removal. Fruit waste was collected from the UiTM Pulau Pinang cafeteria, dried in the oven for 24 hours at a temperature of 105°C. The optimum dosage of composite natural coagulant is 90 mg/L using an 80:20 ratio of citrus microcarpa peels and papaya seeds with 97% of turbidity removal. The optimum mixing time is determined where the fast mixing time is 180 rpm for 3 minutes, the slow mixing time is 20 minutes with 10 rpm and the settling time is 30 minutes. The study shows that citrus microcarpa peels and papaya seeds have the potential to become effective natural coagulants in the future.

Optimisation of operating conditions during coagulation-flocculation process in industrial wastewater treatment using Hylocereus undatus foliage through response surface methodology

Application of Response Surface Methodology For Modeling and Optimization of A Bio Coagulation Process (Sewage Wastewater Treatment Plant)

Optimization of the Coagulation-Flocculation Process for Pulp Mill Wastewater Treatment Using a Combination of Uniform Design and Response Surface Methodology

Process optimization via response surface methodology in the physico-chemical treatment of vegetable oil refinery wastewater

Landfill Leachate Pretreatment by Coagulation–flocculation Process Using Iron-Based Coagulants: Optimization by Response Surface Methodology

Optimization of the coagulation-flocculation process for vegetable oil refinery wastewater using a full factorial design

Performance Optimization of Chemical and Green Coagulants in Tannery Wastewater Treatment: A Response Surface Methodology Approach

Coagulation/flocculation process using Moringa oleifera bio-coagulant for industrial paint wastewater treatment: optimization by D-optimal experimental design

Multiple Response Optimization of the Coagulation Process for Upgrading the Quality of Effluent from Municipal Wastewater Treatment Plant

Aspergillus niger as an efficient biological agent for separator sludge remediation: two-level factorial design for optimal fermentation

Process optimization for PHA production by activated sludge using response surface methodology

Modeling and optimizing of coagulation-flocculation process by response surface methodology for rehabilitation of tannery wastewater treatment plant

onventional water treatment plant for the minimization of new emerging pollutants in drinking water sources : process optimization using response surface methodology †

Response surface optimisation of a magnetic coagulation process for wastewater treatment via Box-Behnken

Electrocoagulation process for oily wastewater treatment and optimization using response surface methodology

Utilization of citrus microcarpa peels and papaya seeds as a natural coagulant for turbidity removal

Optimization of copper adsorption from synthetic wastewater by oil palm-based adsorbent using Central Composite Design

Combination of Chemical Coagulation and Photo-Fenton Oxidation Process for the Treatment of Beet Sugar Industry Wastewater: Optimization of Process Conditions by Response Surface Methodology

Optimising coagulation/flocculation using response surface methodology and application of floc in biofertilisation

Optimization of Coagulation to Remove Turbidity from Surface Water Using Novel Nature-Based Plant Coagulant and Response Surface Methodology

Study on optimal conditions of flocculation in deinking wastewater treatment