Abstract:Elevated arsenic (As) contamination in water, especially groundwater, has been recognized as a major problem of catastrophic proportions. This work explores As(V) removal via the coagulation-flocculation process by use of ferric chloride coagulant and polyacrylamide k16 co-coagulant as a first time. The effects of major operating variables such as coagulant dosing (50, 125 and 200 mg/L), co-coagulant dosing (5, 12.5 and 20 mg/L), pH (6, 7and 8), fast mixing time (1, 2 and 3 min), and fast mixing speed (110, 200 and 300 rpm) on As(V) removal efficiency were investigated by a Box-Behnken statistical experiment design (BBD) and response surface methodology (RSM). According to factors F values, coagulant dosing, rapid mixing speed, pH, and co-coagulant dosing showed the most effect on As(V) removal efficiency, and the rapid mixing time factor indicated the slightest effect. The proposed quadratic model was significant with a p value < 0.0001 and has satisfactorily described the experimental data with R2 and adjusted R2 values of 0.9855 and 0.9738, respectively. Predicted model optimal conditions with target of complete As(V) removal were coagulant dosing = 197.63 ppm, co-coagulant dosing = 19.55 ppm, pH = 7.37, fast mixing time = 1.43 min and fast mixing speed = 286.77 rpm. The treatment of Nazarabad well water sample with an initial As(V) concentration of 5 mg/L under the optimal conditions removed 100% As(V) with the volume of produced sludge of 10.7 mL/200 mL. Increasing coagulant dosing, co-coagulant dosing, fast mixing time and fast mixing speed operation parameters from low-level to high-level values indicated 78%, 20%, 10.52% and 9.47% increases in volume of the produced sludge, respectively. However, a reduction of 13.63% in volume of the produced sludge resulted via pH increases.

Optimization of Coagulation-Flocculation Process for Tello River Water Treatment Using Poly Aluminum Chloride and Aluminum Sulfate

Improvement of alum and PACl coagulation by polyacrylamides (PAMs) for the treatment of pulp and paper mill wastewater

Optimization of the Coagulation-Flocculation Process for Pulp Mill Wastewater Treatment Using a Combination of Uniform Design and Response Surface Methodology

Parametric study of coagulant recovery from water treatment sludge towards water circular economy

Modeling and optimizing of coagulation-flocculation process by response surface methodology for rehabilitation of tannery wastewater treatment plant

Enhancing water–wastewater treatment efficiency: synergistic approach using polyaluminum chloride, sodium alginate, and magnetite for Congo red removal

Performance of Alum Coagulation and Adsorption on Removing Organic Matter and E. coli

Enhanced Coagulation for High Alkalinity and Micro-Polluted Water: the Third Way Through Coagulant Optimization.

Modeling and optimization of the coagulation/flocculation process in turbidity removal from water using poly aluminum chloride and rice starch as a natural coagulant aid

Effect of Coagulants Variations in the Coagulation Unit on the Efficiency of Raw Water Turbidity Removal Sedimentation Unit Continuous Discharges Flow (CDF) as a New Method

Selection of coagulant for treatment of raw water with low temperature and low turbidity from Luanhe River

Optimization of Coagulation to Remove Turbidity from Surface Water Using Novel Nature-Based Plant Coagulant and Response Surface Methodology

Optimization of Coagulation-Flocculation Process in Efficient Arsenic Removal from Highly Contaminated Groundwater by Response Surface Methodology

Enhanced Production of in Situ Keggin Al137+ Polymer by a Combined Fe-Al Coagulation Process for the Treatment of High Alkalinity Water

Study on Coagulation Property of Metal-Polysilicate Coagulants in Low Turbidity Water Treatment

OPTIMAL RESEAREH ON ENHANCED COAGULATION FOR TREATMENT OF TANNERY WASTEWATER

Evaluation Conditions to Treat Slime Water with Coagulant-Bioflocculant by Orthogonal Design

Optimization of pre-oxidation enhanced coagulation for micro-polluted water treatment by response surface method

Application of Response Surface Methodology For Modeling and Optimization of A Bio Coagulation Process (Sewage Wastewater Treatment Plant)

Multiple Response Optimization of the Coagulation Process for Upgrading the Quality of Effluent from Municipal Wastewater Treatment Plant

The Optimal Experimental Research on the Fluoride Removal from Efficient-Whirling Clarifier