Abstract:Al–Fe alloys have drawn attention of researchers for many decades since Fe is the most common impurity in Al that, because of its low solid solubility, forms brittle aluminides that affect the mechanical properties. Thus, it is interesting to provide microstructure control of these intermetallics and achieve high strength, thermal stability, and high electrical conductivity. High-pressure torsion (HPT) has been applied to an Al–2%Fe alloy with two different eutectic phases containing Al 6 Fe and Al 3 Fe intermetallics, to refine, disperse and partially dissolve them. The microstructure after HPT processing at different levels of imposed strain was observed using aberration-corrected high-resolution scanning/transmission electron microscopy (HR-S/TEM) to perform a detailed analysis of the dispersion of intermetallic phases and their orientation relationships with the Al matrix. The precipitates from the supersaturated solid solution achieved by post HPT aging, responsible for age-hardening were also studied in detail. Fragmentation of secondary Al 3 Fe and Al 6 Fe phases occurs down to sizes in the nano-scale and a fine dispersion of particles with coherency with the matrix in lattice planes with similar spacing (low misfit strain) was observed even after high straining by HPT. Semi-coherent Al 6 Fe is the dominant precipitate in the peak-aged condition and phase transformation of the particles from Al 6 Fe to Al 3 Fe occurs with aging. The Al 3 Fe particles loose coherency as they grow in size. It was possible to explain the age hardening effect with respect to the coherency and orientation relationship of the Fe-containing particles in the nano-scale, by a similar mechanism for Al alloys with miscible elements, which has not been reported for ultrafine-grained Al–Fe alloys to date.

TEM characterization of pure and transition metal enhanced NaAlH4

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Recent Electron Microscopy Results on Micro- and Nanostructured Ni-Ti-(X) Shape Memory Alloys

High-resolution electron microscopy study of particle dispersion and precipitation in a nanostructured Al–2%Fe alloy

An x-ray photoemission electron microscopy study of the formation of Ti-Al phases in 4 mol% TiCl3 catalyzed NaAlH4 during high energy ball milling

Characterization of precipitation in Al-Li alloy AA2195 by means of atom probe tomography and transmission electron microscopy

Electron Microscopy Study of Ti-Doped Sodium Aluminum Hydride Prepared by Mechanical Milling Nah/Al with Ti Powder

Dehydrogenation process of titanium and zirconium doped alanates

Ion-irradiation-induced Structural Evolution in Ti4AlN3

Characterization of Nano-scale Instabilities in Titanium Alloys Using Aberration-Corrected Scanning Transmission Electron Microscope

TEM characterization of the precipitation reaction in Ti–48Al–10Nb alloy

The structure and phase transformations in fumed transition alumina by X-ray diffraction and solid-state NMR

An In-Situ TEM Investigation on Microstructure Evolution of Ni-25 At.% Al Thin Films

Characterization of the Microstructure of Sintered Aln by Sem and Tem

In Situ TEM Study of the Hydrogen Effect on the Interface Between Al and Its Oxide at Room and Elevated Temperature

X-Ray Diffraction Studies of Titanium and Zirconium Doped Naalh4: Elucidation of Doping Induced Structural Changes and Their Relationship to Enhanced Hydrogen Storage Properties

Exploration of the Nature of Active Ti Species in Metallic Ti-Doped NaAlH4

Topics on Microstructure Researches in TiAl Intermetallics Using Atomic Scale Observation and Computational Simulation

Advanced Electron Microscopy Characterisation of Al-O Coordination in Catalyst Supports

Evaporated CuAl Amorphous Alloys and Their Phase Transition

Mechanical properties and deformation mechanisms of the C14 Laves and μ-phase in the ternary Ta-Fe(-Al) system