Preparation of High Conductivity Hydrogenated Silicon-Doped Diamond and MOSFET
Qi He,Jinfeng Zhang,Zihui Zhu,Zeyang Ren,Xinxin Yu,Jincheng Zhang,Kai Su,Yijiang Li,Qihui Xu,Junpeng Li,Yue Hao
DOI: https://doi.org/10.1109/ted.2024.3369582
IF: 3.1
2024-03-30
IEEE Transactions on Electron Devices
Abstract:Hydrogenated silicon-doped (Si-doped) diamond was prepared by magnetron sputtering silicon on IIa CVD diamond surface and following Si etch/diffuse process at 1000 °C in a hydrogen atmosphere in MPCVD. The silicon doping concentration was higher than cm−3 among the depth of 25 nm. The hydrogenated Si-doped diamond surface demonstrated the simultaneous presence of C–H and C–Si bonds in the X-ray photoelectron spectroscopy (XPS) results, and a square resistance of 5500 /sq with the hole concentration of cm−2 by contact Hall test. MOSFET fabricated on the hydrogenated Si-doped diamond using traditional hydrogenated diamond device process showed decent device performance. The gold/hydrogenated Si-doped diamond electrodes showed ohmic contact resistivity of cm−2 and a contact resistance of 2.4 mm. Besides, the 1.5- MOSFET device with a threshold voltage of 1.4 V delivered the maximum drain current, ON-resistance, maximum transconductance, and ON/ OFF ratio of −270.5 mA/mm, 39.6 mm, 42.4 mS/mm and 8 orders of magnitude. The gate breakdown field and the OFF-state source-drain breakdown field reached 8.4 and 2.17 MV/cm, respectively. The hydrogenated Si-doped diamond provided a promising route for the preparation of high-performance diamond FET devices.
engineering, electrical & electronic,physics, applied