Abstract:The quest for higher modulation speed and lower energy consumption has inevitably promoted the rapid development of semiconductor-based solid lighting devices in recent years. GaN-based light-emitting diodes (LEDs) have emerged as promising candidates for achieving high efficiency and high intensity, and have received increasing attention among many researchers in this field. In this paper, we use a self-assembled array-patterned mask to fabricate InGaN/GaN multi-quantum well (MQW) LEDs with the intention of enhancing the light-emitting efficiency. By utilizing inductively coupled plasma etching with a self-assembled Ni cluster as the mask, nanopillar arrays are formed on the surface of the InGaN/GaN MQWs. We then observe the structure of the nanopillars and find that the V-defects on the surface of the conventional structure and the negative effects of threading dislocation are effectively reduced. Simultaneously, we make a comparison of the photoluminescence (PL) spectrum between the conventional structure and the nanopillar arrays, achieved under an experimental set-up with an excitation wavelength of 325 mm. The analysis demonstrates that MQW-LEDs with nanopillar arrays achieve a PL intensity 2.7 times that of conventional LEDs. In response to the PL spectrum, some reasons are proposed for the enhancement in the light-emitting efficiency as follows: 1) the improvement in crystal quality, namely the reduction in V-defects; 2) the roughened surface effect on the expansion of the critical angle and the attenuated total reflection; and 3) the enhancement of the light-extraction efficiency due to forward scattering by surface plasmon polariton modes in Ni particles deposited above the p-type GaN layer at the top of the nanopillars.

Improvement of the Emission Intensity of GaN-Based Micro-Light Emitting Diodes by a Suspended Structure

High-output power GaN-LED based on surface plasmon enhancement

Enhanced Light Extraction from a GaN-based Green Light-Emitting Diode with Hemicylindrical Linear Grating Structure.

Study of GaN-Based Light-Emitting Diode (LED) With a Hybrid Surface Structure

Enhancement of Light Extraction from Microstructured GaN-Based Light Emitting Diodes by Technique of Nanoimprint

Surface-plasmon-enhanced GaN-LED based on the multilayered rectangular nano-grating

Stripping GaN/InGaN epitaxial films and fabricating vertical GaN-based light-emitting diodes

The Enhancement of Light-Emitting Efficiency Using GaN-based Multiple Quantum Well Light-Emitting Diodes with Nanopillar Arrays

Microstructure characterization and sidewall treatment of GaN/InGaN micro-light-emitting diodes

Enhancement of Light Output Power from LEDs Based on Monolayer Colloidal Crystal

Improvement of Micro-Led Top Emission Through Surface Nanostructures and Chip Design

Improving Light Output of Vertical-Stand-Type InGaN Light-Emitting Diodes Grown on a Free-Standing GaN Substrate with Self-Assembled Conical Arrays

Growth and Characterization of Micro-LED Based on GaN Substrate

Study of a GaN/InGaN-based Light Emitting Diode with an Indium Gallium Oxide Current Blocking Layer, Silver Nanoparticles, and a Gallium Oxide Surface Passivation Layer

Fabrication and Luminescent Property of GaN Based Light-emitting Diodes with Array Nanorods Structure

High‐Brightness Blue Light‐Emitting Diodes Enabled by a Directly Grown Graphene Buffer Layer

Simultaneously Enhancing Light Emission and Suppressing Efficiency Droop in Gan Microwire-Based Ultraviolet Light-Emitting Diode by the Piezo-Phototronic Effect

GaN-based LEDs with a High Light Extraction Composite Surface Structure Fabricated by a Modified YAG Laser Lift-off Technology and the Patterned Sapphire Substrates

Optimized InGaN/GaN Quantum Structure for High-Efficiency Micro-LEDs Displays With Low Current Injection

Investigation on the Optical Properties of Micro-LEDs Based on InGaN Quantum Dots Grown by Molecular Beam Epitaxy

Enhancement of Performance of GaN-based Light-Emitting Diodes by Insertion and Optimization of N-Ingan/gan Composite Current-Spreading Layers