Abstract:Through the incorporation of phosphorus (P) as a third component, an in-situ formation of a magnetic phase with a nanotwin structure was achieved. The utilization of selective laser melting (SLM) enabled the synthesis of a Cu-Fe-P immiscible alloy that exhibits an integrated structure and function. The microstructure predominantly consists of a magnetic heterogeneous Fe-P-rich phase, comprising a mixture of Fe2P and a small quantity of Fe3P, which is distributed within the & epsilon;-Cu Cu-rich matrix in alternating "fiber -layer" and "particle-shape" forms. Additionally, the fibrous Fe2P phase exhibited precipitation of a-Fe, while the Fe-P-rich phase experienced the precipitation of high-density nanotwinned Cu (nt-Cu) particles. The microstructure density and structural characteristics of Cu-Fe-P immiscible alloys were enhanced through the adjustment of laser energy density, leading to improvements in their mechanical and magnetic prop-erties. It was observed that the microstructure density initially increased and then decreased with increasing laser energy density. The highest relative density of the Cu-Fe-P immiscible alloy microstructure (98%) was achieved at a laser energy density of 53 J/mm3. Furthermore, the influence of laser energy density on the mechanical and soft magnetic properties of Cu-Fe-P immiscible alloys was examined. The findings indicate that the mechanical and soft magnetic properties of these alloys are affected by the laser energy density. The findings indicate that the compact Cu-Fe-P immiscible alloys exhibit favorable compression mechanical properties and soft magnetic properties. Specifically, the ultimate compressive stress can reach 890.5 & PLUSMN; 20 MPa, while the failure strain can reach 20.5 & PLUSMN; 2%. Additionally, the coercivity is observed to be as low as 20.0 Oe, the magnetic saturation strength as high as 93.5 emu/g, and the residual magnetization at 1.1 emu/g.& COPY; 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

Effect of Si Element and TiB2 Nucleating Agent on Microstructure and Magnetic Properties of Cu-based Immiscible Composites by Laser Melting Deposition

Effect of Cu and Cu–Ti additions on the microstructures and magnetic properties of Nd2Fe14B–α-Fe nanocomposite magnets

Microstructure evolution and magnetic properties of metastable immiscible Cu-Fe alloy with micro-alloying B element

Effect of Laser Energy Density on Microstructure and Properties of High Strength and Magnetic Cu-Fe-P Immiscible Alloys Fabricated by Laser Selective Melting

Effect of Cu and Ti Additions on the Microstructures and Magnetic Properties of Nd8Fe86B6 Nanocomposite Magnets

Effects of Ti and (or) Cu on microstructures and magnetic properties of sintered Nd-Fe-B magnets

Effects of Si addition on mechanical, electrical and magnetic property of Cu-10Fe alloy

Effect of Copper and Titanium Addition on Microstructures and Magnetic Propert ies of Sintered NdFeB Magnets

Magnetic Properties Enhancement Of Nd2fe14b/Alpha-Fe Nanocomposites With A Combined Addition Of Cu And Ti

Effect of copper and titanium addition on microstructures and magnetic properties of sintered Nd22Fe71B7 magnets

Effect of Laser Energy Density on Microstructure and Properties Cu–Fe–P Immiscible Alloys Fabricated by Laser Selective Melting: Heterogeneous and High Strength and Magnetic

Effects of adding Cu on the microstructure and properties of in-situ alloyed Fe–Cr–Co permanent magnets by laser powder bed fusion

Microstructural Optimization of Fe‐Rich Intermetallic in Al–12 Wt% Si–2 Wt% Fe Alloys by Adding Travelling Magnetic Fields

TiB2- and Fe2P with nanotwins-reinforced Cu-based immiscible composites fabricated by selective laser melting: Formation mechanism and wear behavior

Properties and microstructural evolution of a ternary Cu–Co–Fe immiscible alloy solidified under high magnetic fields

The role of Cu content on structure and magnetic properties of Fe–Si–B–P–Cu nanocrystalline alloys

Mechanism of adding carbonyl iron powder to enhance the magnetic properties of Fe-Si-B-Cu-Nb nanocrystalline soft magnetic composites

Crystallization behavior, soft magnetic properties and good bending ductility of high Fe content FeSiBCuPC alloys induced by composition design

Effect of miscible and immiscible element microalloying on crystallization behavior and soft magnetic properties of Fe-P-C-B amorphous alloy

Roles of Cu in Fe-based Soft Magnetic Nanocrystalline Alloys with High Fe Content

Effects of elemental addition on the microstructure, thermal stability, and magnetic properties of the mechanically alloyed FeSiBAlNi high entropy alloys