Abstract:Continuous silicon carbide (SIC) fiber-reinforced titanium metal-matrix composites (TMCs ) are potential candidates for high temperature application in jet engines because of their high specific strength and stiffness. However, severe interfacial reactions caused by high temperature manufacture and service have a detrimental effect on the mechanical properties of composites. Furthermore, the phase transition occurred in matrix at elevated temperature is unfavorable to the properties. In this work, the interfacial reaction, matrix phase transformation and thermal stability of SiC/Ti65 composites were investigated. The composites were prepared by the combination of magnetron sputtering and hot isostatic pressing (HIP) method. Matrix-coated precursor wires prepared by sputtering were aligned, degased and encapsulated, then consolidated by HIP. And the densified composites were subjected to long-term thermal exposure at 650, 750, 800 and 900 degrees C respectively. Reaction products and element diffusion of SiCf/ Ti65 composites in different conditions were studied. The results show that the elements diffuse and participate in both interfacial reaction and matrix phase transition during HIP and thermal exposure process. In the as-processed SiCf/Ti65 composites, TIC is the main product of interfacial reaction layer, and (Zr, Nb)(5)Si-4 is the product of matrix phase transition. With the continuous consumption of C-coating layer in the process of thermal exposure, Ti5Si3 and (Zr, Nb)(5)Si-4 form in the interfacial reaction layer, while Ti-3(Al, Sn)C and TiC precipitate in the matrix. The results of thermal stability study indicate a parabolic correlation between interfacial reaction layer thickness and exposure time, and the activation energy of reaction layer growth estimated by Arrhenius equation is 93 kJ/mol. The interface of SiCf/Ti65 composites is stable below 650 degrees C.

High-temperature Thermal Stability of C/C-ZrC-SiC Composites Via Region Labeling Method

Thermal stability of CVI and RMI SiC/SiC composites adopting Cansas 3303 SiC fibers

Thermal Stability of SiCf/Ti60 Composites

Interphase Degradation of Three‐dimensional Cf/SiC–ZrC–ZrB2 Composites Fabricated Via Reactive Melt Infiltration

Thermal expansion and dimensional stability of Al–Si matrix composite reinforced with high content SiC

Effect of heat treatment on the microstructure and ablation performance of C/C–SiC composites containing ZrSi 2 –Si

High-temperature Microstructure Evolution and Thermal Stability of SiCf/Ti60 Composites

THE INTERFACIAL THERMAL STABILITY AND ELEMENT DIFFUSION MECHANISM OF SiCf/TC17 COMPOSITE

Design and Preparation of an Ultra-High Temperature Ceramic by In-Situ Introduction of Zr2[Al(Si)]4C5 into ZrB2-SiC: Investigation on the Mechanical Properties and Oxidation Behavior

In-situ reaction syntheis and mechanical properties of ultra high temperture ceramics

Effects of Zr on the Precursor Architecture and High-Temperature Nanostructure Evolution of Sioc Polymer-Derived Ceramics

Mechanisms of Interfacial Reaction and Matrix Phase Transition in SiCf/Ti65 Composites

In Situ Synthesis Mechanism and Characterization of ZrB2–ZrC–SiC Ultra High-Temperature Ceramics

Effects of CaO Additives on the Phase Evolution of ZrO2-SiC Composites from Zircon by Carbothermal Reduction

Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior

Fabrication and Characterization of ZrO_2/SiC Composite Materials

Long-term oxidation and ablation behavior of C<sub>f</sub>/ZrB<sub>2</sub>-SiC composites at 1500, 2000, and 2200C

Effect of Silicon Addition and Thermal History on the Thermal Expansion Behavior of Sic/Al Composites

Low temperature sintering of ZrC-SiC composite

Effect Of Zrc Amount And Distribution On The Thermomechanical Properties Of C-F/Sic-Zrc Composites

Microstructural evolution, mechanical and thermal properties of TiC-ZrC-Cr3C2 composites