Abstract:Continuous silicon carbide (SIC) fiber-reinforced titanium metal-matrix composites (TMCs ) are potential candidates for high temperature application in jet engines because of their high specific strength and stiffness. However, severe interfacial reactions caused by high temperature manufacture and service have a detrimental effect on the mechanical properties of composites. Furthermore, the phase transition occurred in matrix at elevated temperature is unfavorable to the properties. In this work, the interfacial reaction, matrix phase transformation and thermal stability of SiC/Ti65 composites were investigated. The composites were prepared by the combination of magnetron sputtering and hot isostatic pressing (HIP) method. Matrix-coated precursor wires prepared by sputtering were aligned, degased and encapsulated, then consolidated by HIP. And the densified composites were subjected to long-term thermal exposure at 650, 750, 800 and 900 degrees C respectively. Reaction products and element diffusion of SiCf/ Ti65 composites in different conditions were studied. The results show that the elements diffuse and participate in both interfacial reaction and matrix phase transition during HIP and thermal exposure process. In the as-processed SiCf/Ti65 composites, TIC is the main product of interfacial reaction layer, and (Zr, Nb)(5)Si-4 is the product of matrix phase transition. With the continuous consumption of C-coating layer in the process of thermal exposure, Ti5Si3 and (Zr, Nb)(5)Si-4 form in the interfacial reaction layer, while Ti-3(Al, Sn)C and TiC precipitate in the matrix. The results of thermal stability study indicate a parabolic correlation between interfacial reaction layer thickness and exposure time, and the activation energy of reaction layer growth estimated by Arrhenius equation is 93 kJ/mol. The interface of SiCf/Ti65 composites is stable below 650 degrees C.

THE INTERFACIAL THERMAL STABILITY AND ELEMENT DIFFUSION MECHANISM OF SiCf/TC17 COMPOSITE

Mechanisms of Interfacial Reaction and Matrix Phase Transition in SiCf/Ti65 Composites

Thermal Stability of SiCf/Ti60 Composites

Interfacial reactions between polymer derived SiC fiber and Ti 3Si(Al)C2

Interfacial Regulation and Fracture Mechanism of Al–Si/SiC Composites Infiltrated under Super-Gravity Field

Interfacial reaction mechanism and high temperature stability of heat-resistant steel and SiC under a vacuum environment

The Melt Structural Characteristics Concerning the Interfacial Reaction in SiC(p)/Al Composites

Thermodynamic Effects of Alloying Elements on Solid-State Interfacial Reactions in a Multicomponent System: Theoretical Treatment and Application in SiC f /Ti Composites

Interfacial Reactions Between Polymer Derived SiC Fiber and Ti<sub>3</sub>Si(Al)C<sub>2</sub>

Interfacial Reactions and Mechanical Properties Studies of C-Coated and C/B4C Duplex-Coated SiC Fiber-Reinforced Ti2AlNb Composites

Interface Stability of the Sic Particles/Fe Matrix Composite System

The interfacial stability of the coated-SiC/Fe couple

Effect of Thermal Exposure on the Interface Microstructure and Interfacial Shear Strength of the SiC Fiber Reinforced AlFe5Si2 Matrix Composite

Preparation and interfacial layer microstructure of multilayer heterogeneous composite

In-situ synthesis and microstructural evolution of a SiC reinforced Al-50Si composite exhibiting exceptional thermal properties

Rare earth monosilicates as oxidation resistant interphase for SiCf/SiC CMC: Investigation of SiCf/Yb2SiO5 model composites

Reactions Mechanism and Mechanical Properties of a SiCf/SiC Joint Affected by Cu/Ni/Ti Elements and Inhomogeneous Composites

Microstructure and Mechanical Properties of Cf/SiC Composites with Dispersed C-SiC Interphase Prepared by Chemical Vapor Infiltration

Effect of interfacial modification on the thermo-physical property of SiCp/Cu composite

Tensile Property of SiC_f/TC17 Composite at Room Temperature

High-temperature Microstructure Evolution and Thermal Stability of SiCf/Ti60 Composites