Abstract:A reactor is an important piece of equipment used for reactive power compensation in power system and has a significant impact on the safe operation of power system. Thermal behavior is one of the main causes of reactor failures. For an accurate analysis of the thermal behavior of reactors, electromagnetic–thermal–fluid multi-physics coupling modeling is chosen. However, there is a huge difference in size between the overall structure of the reactor and its insulating material, which makes it difficult to perform mesh generation, resulting in dense mesh and significantly increased solution degrees of freedom, thus making the solution of the reactor’s multi-physics field model very time-consuming. To address this, this paper proposes a simplified processing method to accelerate the solution calculation of the reactor’s multi-physics model. This method calculates the equivalent turns of each encapsulate with parallel coils in the reactor, simplifying the encapsulate into a single-layer coil, thereby greatly reducing the division and solution degrees of freedom of the multi-physics model, and thus accelerating the simulation calculation. Taking a BKDCKL-20000/35 dry-type air-core shunt reactor as an example, the outer diameter of the coil is nearly 12,000 times bigger than the coil insulation, which is a huge size difference. Both refined models and simplified models are established. Compared to the simulation results of the detailed model, the simplified model demonstrates good accuracy; the maximum relative error of temperature is just 2.19%. Meanwhile, the computational time of the simplified model is reduced by 35.7%, which shows promising effectiveness and significant potential for applying the optimization design and operation prediction of dry-type air-core shunt reactors for enhanced thermal performance.

Temperature Field Analysis of Dry Iron Core Reactor

Simulation Analysis on Temperature Field of 35 kV Dry-type Air-core Reactor Based on Fluent

Thermal Simulation and Analysis of Dry-Type Air-Core Reactors Based on Multi-Physics Coupling

Analysis of Hot Spot Temperature of Dry-Type Transformer Based on Finite Element Method

Diagnosis and Analysis of Abnormal Heating Fault for 35kV Dry Air Core Reactor

Calculation of Temperature Field of Dry-Type Air-Core Damping Reactor Based on Coupled Method

A Study of Encapsulation Temperature Field of Dry-type Air-core Reactor with the Structure of Equivalent and Aluminum Wire-Insulation

Research on Temperature Field Simulation of Resin Insulated Dry-Type Power Transformers

Simulation analysis on magnetic core loss characteristic of valve reactor in UHVDC system

Research on temperature rise calculation and hot spot temperature inversion method for oil immersed transformer based on magnetic - thermal - fluid

Numerical Analysis of Liquid Potassium Flow and Heat Transfer in a Core for Space Nuclear Reactor Based on Entransy Dissipation Theory

Thermal Safety Analysis of New Type Heat Pipe Reactor Core

Preliminary Design and Analysis of the DC Reactor for the ITER Converter

Iron Loss and Temperature Rise Analysis of a Transformer Core Considering Vector Magnetic Hysteresis Characteristics under Direct Current Bias

An Efficient Calculation for the Temperature of Dry Air-Core Reactor Based on Coupled Multi-Physics Model

Development and Application of Design Software of Dry-Type Air-Core Reactor

Transient Analysis of Active Cooling Procedure of HTR Reactor Core

Magnetic-Thermal-Flow Field Coupling Simulation of Oil-Immersed Transformer

Numerical Calculation and Analysis of 3D Transient Temperature Field for Transverse Flux Tubular Linear Machine

Numerical Study of Electromagnetic Loss and Heat Transfer in an Oil-Immersed Transformer

PWR core transient temperature numerical simulation based on porous media model