Abstract:Two cases of abnormal acetylene content rise in the oil chromatogram of ultra-high voltage reactors are introduced in this paper. To monitor the internal condition of the reactor in real time and judge the type of defect， a partial discharge critical monitoring device is used for long-term monitoring. Critical monitoring results in case 1 show that there is a partial discharge caused by floating potential and weak insulation defects inside the reactor that lead to the rapid content rise of acetylene. Critical monitoring results in case 2 show that the intermittent partial discharge signal inside the reactor is an external interference signal near the north side of the ultra-high voltage reactors， and there is no obvious internal discharge signal. As to the iron core clamp ground current test， the internal defect type is the high temperature and overheating gas produced by the multi-point grounding of the magnetic circuit， and the chromatogram growth has nothing to do with the partial discharge. It is discovered by disassembly that the equipotential copper tape of the ground screen connected to the clamp on reactor body 1 in case 1 has broken discharge traces and the insulation paperboard is damaged. In case 2， the iron yoke of reactor body 1 and the magnetic shield of the upper body are overlapped， and the contact surface is obviously ablated with no obvious discharge trace inside， which excludes the possibility of internal discharge. The disassembly results are consistent with the analysis conclusions of the partial discharge critical monitoring system， verifying the effectiveness of the partial discharge critical monitoring method in power equipment defect analysis. The method can evade misjudgment due to external signal interference.

Diagnosis and Analysis of Abnormal Heating Fault for 35kV Dry Air Core Reactor

Internal Fault Diagnosis and Analysis of a 1000kV Shunt Reactor with Abnormal Ground Current of Iron Core and Clamp

A Fault Analysis of 750kV Shunt Reactor and Repair Program

Analysis of a Dry-type Reactor Fault Based on COMSOL Thermal Field Simulation and High Frequency Pulse Oscillations

Simulation Analysis on Temperature Field of 35 kV Dry-type Air-core Reactor Based on Fluent

A New Method to Detect the Inter-Turn Short Circuit Fault of Dry-Type Air-Core Shunt Reactor

Thermal-mechanical combined damage analysis of 35kV dry-type air-core reactor inter-turn insulation

Application of Partial Discharge Critical Monitoring Technology in Internal Defect Detection of Ultra-high Voltage Reactors

A Preliminary Study on the Formation Mechanism of Microcracks in Dry-type Air-core Shunt Reactors

Online Detection of Inter-Turn Short Circuit Faults in Dry-Type Air-Core Reactor

Mechanical & Thermal Stress Analysis under Actual Condition and Test Design of 550kv High Coupled Split Reactor

Analysis of a 35kV vacuum circuit breaker accident caused by protection misoperation

Research on vibration characteristics of dry-type air-core reactor under turn-to-turn short circuit fault

Analysis and Treatment of an Overheated Ablated Fault on the Pole Shoe Surface of a Large Tubular Hydro-Generator

Temperature Field Analysis of Dry Iron Core Reactor

Thermal Defect of 220 Kv MOA by Infrared Diagnosis and Field Treatments Analysis

Noninvasive method for online detection of internal winding faults of 750 kV EHV shunt reactors

The Study On Reactor Fault Detection Based on Model Layering

Simulation on Transient Characteristics of Inter-Turn Short Circuit Fault of Dry-type Air-Core Reactor Based on ANSYS Maxwell

Incident Analysis of Excessive Acetylene from a 1000 Kv Shunt Reactor Due to Transient Operations