Abstract:The liquid metal fast reactor represents an important reactor type for the future development of nuclear energy. Accurately modeling and predicting the subchannel flow and heat transfer phenomenon in the rod bundles plays a key role in ensuring core safety. Consequently, a subchannel code suitable for the liquid metal fast reactor is analyzed based on the subchannel analysis code of the Pressurized Water Reactor (PWR). The modified code incorporates various types of liquid metals, such as lead, lead-bismuth eutectic (LBE), and sodium, along with their constitutive models, enhancing the applicability of the liquid metal reactor systems. This code has been verified and validated at several levels, including comparing the code simulation results with other similar subchannel codes results, high-dimensional Computational Fluid Dynamics (CFD) simulations, and experiment data. The sensitivity analysis of core geometric parameters and turbulent mixing coefficients is performed based on the modified version code. The influence of the core geometry, including the rod Pitch to Diameter ratio (P/D), Rod to Wall gap (RTW) and the wire wrap pitch (H) on the sensitivity of outlet temperature has been investigated. The results show that the new subchannel analysis code suitable for liquid metal cooled reactor shows reasonable agreement with the verified and validated results. The geometric parameters, such as P/D, RTW and H have noticeable effects on the outlet temperature difference of the subchannels. Additionally, the outlet temperature distribution in the subchannel is significantly affected by different turbulent mixing coefficients and the distribution of the turbulent mixing coefficient also influenced by the reactor core sizes. Overall, this study could support the rod bundles design and safety analysis in the liquid metal reactors.

Numerical Analysis of Liquid Potassium Flow and Heat Transfer in a Core for Space Nuclear Reactor Based on Entransy Dissipation Theory

Numerical Study on Heat Transfer Performance of Cooling Channels in Space Core

Turbulent heat transfer of liquid metal inside the sub-channels of reactor core

Numerical Investigation for the Heat Transfer Mechanisms Between Subchannels of Bar Rod Bundles Cooled by Liquid Sodium

Study on flow and heat transfer characteristics of liquid metal flow in narrow rectangular channels under high heat flux

Numerical Investigation on Heat Transfer Features of Gas-Cooled Open Lattice Reactor in Normal Operations

Experimental study on flow and heat transfer of medium-Prandtl-number fluid along a hexagonal helical cruciform seven-rods

Numerical Simulation of Three-Dimensional Flow and Heat Transfer Characteristics of Liquid Lead–bismuth

A subchannel analysis code for advanced liquid metal fast reactor cores and study on heat transfer characteristics of core geometry parameters

Prediction of Flow and Temperature Distributions in a High Flux Research Reactor Using the Porous Media Approach

Numerical and Experimental Analysis of LBE Flow and Heat Transfer Characteristics in Hexagonal Rod Bundles

Numerical Investigation of Flow and Heat Transfer Characteristics in Plate-Type Fuel Channels of IAEA MTR Based on OpenFOAM

Numerical Study on Laminar-Turbulent Transition Flow in Rectangular Channels of a Nuclear Reactor

Numerical Investigation of the Heat Transfer Characteristics of Liquid Lithium Metal in Spiral Tubes

Numerical Investigation on Heat Transfer Characteristics of Liquid Metal Cross Flow over Tube Bundles

Numerical and Theoretical Investigations of Heat Transfer Characteristics in Helium–Xenon Cooled Microreactor Core

Numerical Investigation of Flow and Heat Transfer Characteristics of Subcooled Boiling in a Single Rod Channel With/without Spacer Grid

Simulation of Turbulent Flow and Heat Transfer in Channels Between Rod Bundles

Turbulent Convective Heat Transfer Behavior of Supercritical Water Flowing Upward in 2 × 2 Rod Bundle Channels with Various Spacers

Preliminary exploration of liquid metals turbulent heat flux model based on OpenFOAM solver: Second-order differential heat flux model

Numerical Investigation on the Heat Transfer Characteristics of Liquid Lithium Metal in a Bent Tube and Its Structure Optimization