Abstract:The turbulent flow and heat transfer characteristics of supercritical water, flowing in vertical 2 x 2 rod bundle channel, are numerically investigated to find useful methods to improve the cooling performance in the core of a supercritical water-cooled reactor. The heat transfer behavior as a function of mass flux and inlet temperature is analyzed and discussed. Standard grid and helical wire spacers are added to the channel, and overall heat transfer performance is evaluated and compared. The results indicate that the fuel rods can be cooled more effectively when the fluid temperature is near the pseudocritical point due to the high specific heat capacity at this temperature and pressure, and the local heat transfer coefficient can be improved greatly from the application of grid spacers; however, heat transfer enhancement only happens in limited regions downstream of the grid spacers. By contrast, strong swirl flow can be induced by a helical wire, thus the mixing of coolant is strengthened, and the convective heat transfer is enhanced. However, local hot spots also occur in the region near the wires. Both grid and helical wire spacers will lead to an increase in pressure loss, but the additional pressure drop induced by the helical wire is smaller, hence better comprehensive heat transfer performance is achieved for a wire-wrapped channel. Moreover, heat transfer performance can also be enhanced by reducing the pitch of the spacers. This suggests that applying spacers and optimizing their configurations and structures is helpful to achieving better cooling performance in rod bundle channels.

Numerical Study on Heat Transfer Performance of Cooling Channels in Space Core

Numerical Study on Performances of Mini-Channel Heat Sinks with Non-Uniform Inlets

Detailed Heat Transfer Measurements of Curved Fin Channels

Numerical Analysis of Liquid Potassium Flow and Heat Transfer in a Core for Space Nuclear Reactor Based on Entransy Dissipation Theory

Numerical Simulation on Channel Selection for Liquid Metal Cooling Device in Space Environment

Study on flow and heat transfer characteristics of liquid metal flow in narrow rectangular channels under high heat flux

Numerical Study on the Heat Transfer Characteristics of Supercritical Water in Enhanced Sub-Channels in Reactors

Numerical Study on Temperature Uniformity in a Novel Mini-Channel Heat Sink with Different Flow Field Configurations

Numerical Investigation on the Flow and Heat Transfer Characteristics in a Rectangular Channel with V-shaped Slit Ribs

Experiemental Study on Heat Transfer of Supercritical Water in Triangular Channel of Reactor Core with Spacer Grid

Turbulent Convective Heat Transfer Behavior of Supercritical Water Flowing Upward in 2 × 2 Rod Bundle Channels with Various Spacers

Numerical Investigation of Flow and Heat Transfer Characteristics of Subcooled Boiling in a Single Rod Channel With/without Spacer Grid

Numerical investigations of heat transfer augmentation in a microchannel heat sink with different shaped periodic reentrant cavities on channel sidewalls

Effects of wave number and average radius on flow and heat transfer in a curve-wave channel

The numerical investigation of the thermal–hydraulic behavior in a 3 × 3 rod bundle with spacer grids

Heat Transfer and Pressure Loss Simulations of Matrix Cooling Channels for Gas Turbine Airfoils

Numerical optimization simulation on heat transfer in cooling channel of H2/O2 liquid rocket engine thrust chamber

Numerical Study on Coupled Heat Transfer of Thrust Chamber with Regenerative Cooling

Numerical investigation of heat transfer and fluid flow in cooling channel of H2/O2 liquid rocket engine thrust chamber

Numerical Study On Forced Convective Heat Transfer In Porous Pin Fin Channels

Numerical Investigation of Fluid Flow and Heat Transfer in High-Temperature Wavy Microchannels with Different Shaped Fins Cooled by Liquid Metal