Abstract:Purpose - To find the optimal number of channels of rocket engine thrust chamber, it was found that the optimal channel number is 335, at which the cooling effect of the thrust chamber cooling channel reaches the best, which can be helpful to design rocket engine thrust chamber. Design/methodology/approach - The commercial computational fluid dynamics (CFD) software FLUENT with standard k-epsilon; turbulent model was used. The CFD method was validated via comparing with the available experimental data. Findings - It was found that both the highest temperature and the maximal heat flux through the wall on the hot-gas side occurs about the throat region at the symmetrical center of the cooling channel. Owing to the strong curvature of the cooling channel geometry, the secondary flow reached its strongest level around the throat region. The typical values of pressure drop and temperature difference between the inlet and exit of cooling channel were 2.7 MPa and 67.38 K (standard case), respectively. Besides an optimal number of channels exist, and it is approximately 335, which can make the effect of heat transfer of cooling channels best with acceptable pressure drop. As a whole, the present study gives some useful information to the thermal design of liquid rocket engine thrust chamber. Research limitations/implications - More detailed computation and optimization should be performed for the fluid flow and heat transfer of cooling channel. Practical implications - A very useful optimization on heat transfer and fluid flow in cooling channel of liquid rocket engine thrust chamber. Originality/value - This paper provides the performance of optimization on heat transfer and fluid flow in cooling channel of liquid rocket engine thrust chamber, which can make the effect of heat transfer of cooling channels best with acceptable pressure drop. As a whole, the present study gives some useful information to the thermal design of liquid rocket engine thrust chamber.

Numerical investigation of heat transfer and fluid flow in cooling channel of H2/O2 liquid rocket engine thrust chamber

Numerical optimization simulation on heat transfer in cooling channel of H2/O2 liquid rocket engine thrust chamber

Effect of aspect ratio on heat transfer and fluid flow in regenerative cooling channel of liquid rocket engine thrust chamber

303 Numerical Simulation on Heat Transfer and Fluid Flow in Cooling Channel of Liquid Rocket Engine Thrust Chamber

Numerical Study of Liquid Film Cooling in a Rocket Combustion Chamber

Numerical simulation and optimization on heat transfer and fluid flow in cooling channel of liquid rocket engine thrust chamber

Numerical Study on Coupled Heat Transfer of Thrust Chamber with Regenerative Cooling

Numerical Study of Film and Regenerative Cooling in A Thrust Chamber at High Pressure

Numerical Simulation Coupling on Fluid Flow and Heat Transfer in Nozzle and Equipment Cabin of Solid Rocket Motor during Operation Process

Asymmetric Heating and Buoyancy Effects on Heat Transfer of Hydrocarbon Fuel in a Horizontal Square Channel at Supercritical Pressures

Numerical study of film cooling in single-element injector gaseous CH4/O2 rocket engine with coupled wall function

Numerical Analysis of Heat Transfer in Precooler for Hybrid Airbreathing Rocket Engines

Numerical Simulation of Turbulent Flow and Heat Transfer in Multi‐channel, Narrow‐gap Fuel Element

Numerical Investigation of the Thermal-Mechanical Behaviors in the Regenerative Cooling Channel Considering Thermal Pyrolysis

Study on Unsteady Heat Transfer Characteristic of Liquid Hydrogen Precooling Loop of Rocket Engine

A Coupled Heat Transfer Calculation Strategy for Composite Cooling Liquid Rocket Engine

Numerical Investigation on Heat Transfer and Oxidation Deposition of Aviation Fuel in a Rotatory U-Channel

Investigation on the Transpiration Cooling of a Liquid Rocket Nozzle

Numerical Study on Temperature Distribution of Tank Pressurization Process of Liquid Rocket During Outflow

Numerical Investigation of Transpiration Cooling Coupled With Combustion in the Thrust Chamber of Liquid Rocket

Numerical Simulation of High Temperature Transpiration Cooling in Cylindrical Porous Channels