Abstract:Purpose - To find the optimal number of channels of rocket engine thrust chamber, it was found that the optimal channel number is 335, at which the cooling effect of the thrust chamber cooling channel reaches the best, which can be helpful to design rocket engine thrust chamber. Design/methodology/approach - The commercial computational fluid dynamics (CFD) software FLUENT with standard k-epsilon; turbulent model was used. The CFD method was validated via comparing with the available experimental data. Findings - It was found that both the highest temperature and the maximal heat flux through the wall on the hot-gas side occurs about the throat region at the symmetrical center of the cooling channel. Owing to the strong curvature of the cooling channel geometry, the secondary flow reached its strongest level around the throat region. The typical values of pressure drop and temperature difference between the inlet and exit of cooling channel were 2.7 MPa and 67.38 K (standard case), respectively. Besides an optimal number of channels exist, and it is approximately 335, which can make the effect of heat transfer of cooling channels best with acceptable pressure drop. As a whole, the present study gives some useful information to the thermal design of liquid rocket engine thrust chamber. Research limitations/implications - More detailed computation and optimization should be performed for the fluid flow and heat transfer of cooling channel. Practical implications - A very useful optimization on heat transfer and fluid flow in cooling channel of liquid rocket engine thrust chamber. Originality/value - This paper provides the performance of optimization on heat transfer and fluid flow in cooling channel of liquid rocket engine thrust chamber, which can make the effect of heat transfer of cooling channels best with acceptable pressure drop. As a whole, the present study gives some useful information to the thermal design of liquid rocket engine thrust chamber.

Numerical Study of Film and Regenerative Cooling in A Thrust Chamber at High Pressure

Numerical Study on Coupled Heat Transfer of Thrust Chamber with Regenerative Cooling

Numerical Study of Liquid Film Cooling in a Rocket Combustion Chamber

Numerical investigation of heat transfer and fluid flow in cooling channel of H2/O2 liquid rocket engine thrust chamber

Effect of aspect ratio on heat transfer and fluid flow in regenerative cooling channel of liquid rocket engine thrust chamber

Numerical Investigation of the Thermal-Mechanical Behaviors in the Regenerative Cooling Channel Considering Thermal Pyrolysis

Numerical optimization simulation on heat transfer in cooling channel of H2/O2 liquid rocket engine thrust chamber

Experimental and Numerical Study on Liquid Film Cooling Performance under Heated Wall Condition

Numerical study of supercritical-pressure fluid flows and heat transfer of methane in ribbed cooling tubes

A Study on Chamber Pressure Upper Limit of Liquid Rocket Engine Utilizing Film and Radiative Cooling

Numerical study of film cooling in single-element injector gaseous CH4/O2 rocket engine with coupled wall function

303 Numerical Simulation on Heat Transfer and Fluid Flow in Cooling Channel of Liquid Rocket Engine Thrust Chamber

Gas film/regenerative composite cooling characteristics of the liquid oxygen/liquid methane (LOX/LCH4) rocket engine

Numerical Study of Supersonic Film Cooling in Diverging Section of Nuclear Rocket Laval Nozzle

Numerical simulation and optimization on heat transfer and fluid flow in cooling channel of liquid rocket engine thrust chamber

A Novel Model of Liquid Film Flow and Evaporation for Thermal Protection to a Chamber with High Temperature and High Shear Force

Study on local heat transfer enhancement technique for high pressure chamber

Numerical Study of Film Cooling at the Outlet of Gas Turbine Exhaust

Parametric numerical analysis of regenerative cooling in hydrogen fueled scramjet engines

Thermal performance of MMH/NTO rocket thrust chamber based on pintle injector by using liquid film cooling

A Coupled Heat Transfer Calculation Strategy for Composite Cooling Liquid Rocket Engine