Abstract:The use of film cooling is crucial to avoid high metal temperatures in gas turbine applications, thus ensuring a high lifetime for vanes and blades. The complex turbulent mixing process between the coolant and the main flow requires an accurate numerical prediction to correctly estimate the impact of ejection conditions on the cooling performance. Recent developments in numerical models aim at using hybrid approaches that combine high precision with low computational cost. This paper is focused on the numerical simulation of a cylindrical film cooling hole that operates at a unitary blowing ratio, with a hot gas Mach number of Mam = 0.6, while the coolant is characterized by plenum conditions (Mac = 0). The adopted numerical approach is the Stress-Blended Eddy Simulation model (SBES), which is a blend between a Reynolds-Averaged Navier–Stokes approach and a modeled Large Eddy Simulation based on the local flow and mesh characteristics. The purpose of this paper is to investigate the ability of the hybrid model to capture the complex mixing between the coolant and the main flow. The cooling performance of the hole is quantified through the film cooling effectiveness, the Net Heat Flux Reduction (NHFR), and the discharge coefficient CD calculation. Numerical results are compared both with the experimental data obtained by the University of Karlsruhe during the EU-funded TATEF2 project and with a Scale Adaptive Simulation (SAS) run on the same computational grid. The use of λ2 profiles extracted from the flow field allows for isolating the main vortical structures such as horseshoe vortices, counter-rotating vortex pairs (e.g., kidney vortices), Kelvin–Helmholtz instabilities, and hairpin vortices. Eventually, the contribution of the unsteady phenomena occurring at the hole exit section is quantified through Proper Orthogonal Decomposition (POD) and Spectral Proper Orthogonal Decomposition methods (SPOD).

Numerical Study of Film Cooling at the Outlet of Gas Turbine Exhaust

An Experimental Study of Turbine Vane Film Cooling Using Endoscope-Based PSP Technique in a Single-Passage Wind Tunnel

Numerical Simulation for Heat Transfer Properties at Trailing Edge of Gas Turbine Airfoils

An Experimental and Numerical Investigation of Near Cooling Hole Heat Fluxes on a Film-Cooled Turbine Blade

Experimental and numerical investigations of cooling characteristics on endwall partitioned film cooling with shaped holes

Numerical Simulation on Effects of Film Hole Geometry and Mass Flow on Vortex Cooling Behavior for Gas Turbine Blade Leading Edge

Numerical study of effusion cooling of a gas turbine combustor liner

Numerical Investigation of the Cooling Flow Downstream of a Turbine Guide Vane Trailing Edge Slot

An Experimental and Numerical Investigation on Endwall Film Cooling

Radiative Effectiveness on the Aero- and Thermodynamics in a Highly Thermally Loaded Film Cooling System

Numerical Investigation Of Coolant-To-Mainstream Scaling Parameters With Film Cooling On Pressure And Suction Side Of A Gas Turbine Blade

Comprehensive Evaluation on Conjugate Heat Transfer and Thermal Stress Performance of Film Cooling

Evaluation of Film Cooling Adiabatic Effectiveness and Net Heat Flux Reduction on a Flat Plate Using Scale-Adaptive Simulation and Stress-Blended Eddy Simulation Approaches

Study on Heat Transfer and Cooling in Gas Turbine Blade:Film Cooling

Experimental and Numerical Investigations of Discrete Film Holes Cooling Performance on a Blade Endwall with Mid-Passage Gap Leakage

Numerical Study On Film Cooling And Convective Heat Transfer Characteristics In The Cutback Region Of Turbine Blade Trailing Edge

Numerical Predictions of Three-Dimensional Unsteady Turbulent Film-Cooling for Trailing Edge of Gas-Turbine Blade Using Large Eddy Simulation

Numerical Simulation on Film Cooling Performance of Leading Edge of AGTB Blade

Numerical Simulation of Film Cooling at the Leading Edge of a Turbine Blade with Two Rows of Staggered Holes

Numerical analysis for film cooling characteristics of trenched hole under the effects of rib-disturbed feed flow and curved surface

An Experimental and Numerical Study on the Liquid Cooling of a Gas Turbine Blade