Abstract:In the modern highly-loaded gas turbine, due to the large pressure difference between the suction side and the pressure side of the turbine blade, strong cross flow is formed and it strongly affects the aerodynamic and cooling performances in the end-wall region. The film cooling behavior in the environment of strong cross flow is different from the straight channel environment widely studied in the literature. In this research, the effect of cross flow on film cooling is investigated by Large Eddy Simulation (LES) using subgrid-scale (SGS) model. Numerical simulation is carried out in a curved passage to simulate the turbine blade passage. Shaped cooling hole with blowing ratio 1 is studied. The time-averaged friction line results are compared with existing experimental ink trace results. The vortex structures, both time-averaged and instantaneous, are analyzed to study the effect of cross flow on film cooling. At the exit of the cooling hole, the hanging vortices with negativey-vorticity are more flat in shape and closer to the wall in position in contrast to hanging vortex with positive y-vorticity, which is caused by cross flow and results in the asymmetry of hairpin vortices downstream as well as the asymmetry of the distribution of coolant. It has been shown that the vortices from mainstream have a significant impact on the field near the exit of the cooling hole. Those vortices interact with the hairpin vortices from the cooling hole and directly lead to the asymmetry of the hairpin vortices. Proper Orthogonal Decomposition (POD) analysis is further conducted to extract the dominant flow structures and the physical mechanisms of primary POD modes are given to explain the distribution of film cooling effectiveness affected by cross flow. Based on the specific situation in this work, a fast incremental POD (iPOD) approach is adopted since the rank of the field matrix is far less than the rows, which is caused by the tall and thin character of the matrix, which makes the analysis less costly and more effective. This research helps to understand the cooling performance in the real turbine blade passage and to explain the coolant mixing process based on the instantaneous flow field obtained using high precision LES simulation and powerful iPOD.

Numerical Simulation on the Effect of Film Cooling at Leading Edge of Turbine Blade with Two Rows of Staggered Holes

Numerical Evaluation of Novel Shaped Holes for Enhancing Film Cooling Performance

Numerical Investigation of Film Cooling Effectiveness on a Rotating Turbine Blade Model

Numerical Investigation of Influence for Cooling Hole Shape on Turbine Flowfield

Numerical simulation on impingement and film composite cooling of blade leading edge model for gas turbine

Numerical Study of Film Cooling of a Flat Plate at Different Blowing Ratios

The Experimental and Numerical Research for Linear Cascade Film Cooling with Different Hole Shapes

Numerical Simulation for Heat Transfer Properties at Trailing Edge of Gas Turbine Airfoils

Experimental and Numerical Investigation on Film Cooling Performance and Flow Structure of Film Holes

Experimental and Numerical Investigations of Discrete Film Holes Cooling Performance on a Blade Endwall with Mid-Passage Gap Leakage

Evaluation of Film Cooling Adiabatic Effectiveness and Net Heat Flux Reduction on a Flat Plate Using Scale-Adaptive Simulation and Stress-Blended Eddy Simulation Approaches

Conjugate Heat Transfer Simulation of Overall Cooling Performance for Cratered Film Cooling Holes

Numerical Study Of Impingement And Film Composite Cooling On Blade Leading Edge

Numerical Predictions of Three-Dimensional Unsteady Turbulent Film-Cooling for Trailing Edge of Gas-Turbine Blade Using Large Eddy Simulation

Numerical Simulations on Film Cooling Effectiveness from Two Staggered Rows of Coolant Jets

Numerical Simulation and Design Improvement of Leading-Edge Film Cooling in an Inlet Guide Vane

Effect of Film Cooling Arrangement on Impingement Heat Transfer on Turbine Blade Leading Edge

Numerical investigation on flow and heat transfer characteristics of vortex cooling in an actual film-cooled leading edge

LARGE-EDDY SIMULATION OF SHAPED HOLE FILM COOLING WITH THE INFLUENCE OF CROSS FLOW

Numerical Simulation of Turbine Stage with Cooling Gas Injection

Experimental investigation of hole-geometry effect on unsteady characteristics of film cooling at turbine vane leading edge