Abstract:Purpose - To find the optimal number of channels of rocket engine thrust chamber, it was found that the optimal channel number is 335, at which the cooling effect of the thrust chamber cooling channel reaches the best, which can be helpful to design rocket engine thrust chamber. Design/methodology/approach - The commercial computational fluid dynamics (CFD) software FLUENT with standard k-epsilon; turbulent model was used. The CFD method was validated via comparing with the available experimental data. Findings - It was found that both the highest temperature and the maximal heat flux through the wall on the hot-gas side occurs about the throat region at the symmetrical center of the cooling channel. Owing to the strong curvature of the cooling channel geometry, the secondary flow reached its strongest level around the throat region. The typical values of pressure drop and temperature difference between the inlet and exit of cooling channel were 2.7 MPa and 67.38 K (standard case), respectively. Besides an optimal number of channels exist, and it is approximately 335, which can make the effect of heat transfer of cooling channels best with acceptable pressure drop. As a whole, the present study gives some useful information to the thermal design of liquid rocket engine thrust chamber. Research limitations/implications - More detailed computation and optimization should be performed for the fluid flow and heat transfer of cooling channel. Practical implications - A very useful optimization on heat transfer and fluid flow in cooling channel of liquid rocket engine thrust chamber. Originality/value - This paper provides the performance of optimization on heat transfer and fluid flow in cooling channel of liquid rocket engine thrust chamber, which can make the effect of heat transfer of cooling channels best with acceptable pressure drop. As a whole, the present study gives some useful information to the thermal design of liquid rocket engine thrust chamber.

Effect of aspect ratio on heat transfer and fluid flow in regenerative cooling channel of liquid rocket engine thrust chamber

Numerical optimization simulation on heat transfer in cooling channel of H2/O2 liquid rocket engine thrust chamber

Numerical investigation of heat transfer and fluid flow in cooling channel of H2/O2 liquid rocket engine thrust chamber

Numerical simulation and optimization on heat transfer and fluid flow in cooling channel of liquid rocket engine thrust chamber

Numerical Study of Film and Regenerative Cooling in A Thrust Chamber at High Pressure

Heat transfer of supercritical hydrogen in rocket engine cooling channels with arc ribs and variable heat flux

The Influence of Thrust Chamber Structure Parameters on Regenerative Cooling Effect with Hydrogen Peroxide as Coolant in Liquid Rocket Engines

Asymmetric Heating and Buoyancy Effects on Heat Transfer of Hydrocarbon Fuel in a Horizontal Square Channel at Supercritical Pressures

Parametric numerical analysis of regenerative cooling in hydrogen fueled scramjet engines

Supercritical Heat Transfer of Cryogenic-Propellant Methane in Rectangular Engine Cooling Channels

Parametric Study on the Hydrocarbon Fuel Flow Rate Distribution and Cooling Effect in Non-Uniformly Heated Parallel Cooling Channels

Numerical Investigation of the Thermal-Mechanical Behaviors in the Regenerative Cooling Channel Considering Thermal Pyrolysis

Numerical study on enhanced heat transfer and flow characteristics of supercritical hydrogen rocket engine's chamber wall using cylindrical ribs structure

Flow and Heat Transfer in a Mini Cooling Channel with Artificial Roughness

Thermal Behavior Inside Scramjet Cooling Channels at Different Channel Aspect Ratios

Numerical Study on Coupled Heat Transfer of Thrust Chamber with Regenerative Cooling

Heat transfer enhancement of hydrogen rocket engine chamber wall by using V-shape rib

Structure Effect of Wall Cooling Channel on Liquid Metal Heat Transfer in Aero-Engines

Effect of Geometry Parameters on the Hydrocarbon Fuel Flow Rate Distribution in Pyrolysis Zone of SCRamjet Cooling Channels

Serpentine and furrowed wavy channels-based enhancement in heat transfer for a rocket engine chamber

Aspect Ratio Effects on the Noncracking and Cracking Heat Transfer in Microchannels