Abstract:Regenerative cooling is one of the most promising schemes for providing thermal protection for scramjets. Under multiple cooling channels, flow maldistribution easily leads to overheating and structural failures. Considering the complicated thermal environment in scramjet combustors, this study focuses on the relationship between flow maldistribution and heat transfer non-uniformity to improve the thermal performance. After validating the flow and heat transfer distributions, three types of heat flux boundary conditions and seven geometric configurations are numerically investigated with n-decane as the coolant. The conventional Z-type parallel channels are modeled with severe flow maldistribution, with the highest mass flow rate being four times more than the lowest. Moreover, the non-uniform heat boundary condition causes the maximum temperature with (486.71 K) to significantly vary. To realize a uniform flow distribution, a baffle structure is introduced into the inlet manifold, where high-pressure zones exist near the ribs and flow redistribution occurs. The modified geometry model comprises five additional channels, resulting in a more uniform flow distribution, higher pressure drops, and smaller variation of the maximum temperature under three types of heat loads. Furthermore, the influence of location and quantity of additional channels is analyzed with five additional geometry models. The dominant effect of the geometric structure is revealed, and the influence of heat flux condition strengthens when the flow maldistribution intensifies. The pressure drop in the inlet header increases with decreasing flow area. Additionally, the matching degree of the real and reference flow distributions (MDRR) is defined, which exhibits a better correlation with the thermal performance than flow uniformity. The maximum temperature increases with the MDRR. Moreover, the mass flow rate distribution is not the sole determining factor. The flow field in the inlet manifold also plays a role, contributing to the complexity of the relationship.

Flow and Heat Transfer in a Mini Cooling Channel with Artificial Roughness

Supercritical Heat Transfer of Cryogenic-Propellant Methane in Rectangular Engine Cooling Channels

Study on local heat transfer enhancement technique for high pressure chamber

Numerical Investigation of the Thermal-Mechanical Behaviors in the Regenerative Cooling Channel Considering Thermal Pyrolysis

Flow Dynamics in Transient Heat Transfer of N-Decane at Supercritical Pressure

Heat transfer of supercritical hydrogen in rocket engine cooling channels with arc ribs and variable heat flux

Investigation on the Transpiration Cooling of a Liquid Rocket Nozzle

Flow maldistribution and heat transfer non-uniformity with an inlet baffle structure in regenerative cooling channels

Serpentine and furrowed wavy channels-based enhancement in heat transfer for a rocket engine chamber

Research on the flow and heat transfer characteristics of RP-3 and structural optimization in parallel bending cooling channels

Turbulent heat transfer enhancement in the mini-channel by enhancing the original flow pattern with v-ribs

Friction factor and heat transfer prediction of rocket engine cooling channels in numerical simulations with high roughness Reynolds number

Numerical study on the heat transfer characteristics of hydrocarbon fuel in the cooling channel filled with porous media

A Coupled Heat Transfer Calculation Strategy for Composite Cooling Liquid Rocket Engine

Numerical Study on Flow and Heat Transfer of Supercritical Hydrocarbon Fuel in Curved Cooling Channel

Effect of artificial roughness on flow and heat transfer of transcritical methane

Studies on the flow acceleration and bouyancy effects on the heat transfer to supercritical CO2 flowing through mini channel

Flow Boiling Heat Transfer Intensification Due to Inner Surface Modification in Circular Mini-Channel

Numerical investigation of pyrolysis and surface coking of hydrocarbon fuel in the regenerative cooling channel

Numerical study on enhanced heat transfer and flow characteristics of supercritical hydrogen rocket engine's chamber wall using cylindrical ribs structure

Heat Transfer Enhancement of Regenerative Cooling Channel with Pyramid Lattice Sandwich Structures