Abstract:Abstract In this paper, the combined effects of ribs and double-layer, dome-shaped turning vanes on heat transfer and pressure drop are investigated in an idealized U-bend channel. Five kinds of ribs including transverse ribs, 45° ribs, 135° ribs, V-shaped ribs, and reverse V-shaped ribs combined with one kind of double-layer, dome-shaped turning vanes are applied. Baseline results are compared with the above composite cooling structures. Numerical simulations are performed by solving 3D, steady Reynolds-averaged Navier-Stokes (RANS) equations with k-ω turbulence model. The channel aspect ratio is 1:2 and its hydraulic diameter is 93.13 mm, respectively. Based on the cooling air inlet velocity and the channel inlet hydraulic diameter, the inlet Reynolds numbers are ranging from 100,000 to 440,000. The detailed three-dimensional fluid flow, pressure and heat transfer distributions are presented. Moreover, the thermal performances of the U-bend channel are also evaluated and compared with different cases. The results revealed that combined with the double-layer, dome-shaped turning vanes, the transverse ribs case has the best thermal performance at the tip wall, and the reverse V-shaped ribs case is the best for the leading wall. The pressure drop of the channel with double-layer, dome-shaped turning vanes without any rib turbulator is the lowest, and that of the channel with inclined ribs is significantly higher than that of the channel with transverse ribs. The superposition of the secondary flow induced by the ribs and the Dean vortex induced by the 180° sharp turn has a marked impact on the flow and heat transfer in the channel. In the double-layer, dome-shaped turning vanes channel, the mass flow distribution of the coolant also affects the heat transfer on the tip wall of the channel, and the ribs can adjust the mass flow distribution. The helical vortex superposed by the mainstream flow and the secondary flow induced by the ribs represents typical flow phenomenon in ribbed channels. The flow and development of the helical vortex are the main factors affecting the heat transfer on the leading/trailing walls.

Heat transfer of supercritical hydrogen in rocket engine cooling channels with arc ribs and variable heat flux

Numerical study on enhanced heat transfer and flow characteristics of supercritical hydrogen rocket engine's chamber wall using cylindrical ribs structure

Supercritical Heat Transfer of Cryogenic-Propellant Methane in Rectangular Engine Cooling Channels

Heat transfer enhancement of hydrogen rocket engine chamber wall by using V-shape rib

Numerical study of supercritical-pressure fluid flows and heat transfer of methane in ribbed cooling tubes

The influence of asymmetric truncated ribs on flow and heat transfer of supercritical aviation kerosene in a rectangular curved cooling channel

Enhanced heat transfer and flow topology of hydrogen regenerative-cooling channels with novel X-shape ribs

Study of Heat Transfer of Cryogenic Methane under Supercritical Pressure with Consideration of Thermal Conduction in Engine Cooling Channel Walls

Asymmetric Heating and Buoyancy Effects on Heat Transfer of Hydrocarbon Fuel in a Horizontal Square Channel at Supercritical Pressures

Numerical investigation of conjugated heat transfer mechanisms of supercritical hydrogen-helium in PCHE channels

Numerical Study of Conjugate Heat Transfer of Cryogenic Methane in Rectangular Engine Cooling Channels at Supercritical Pressures

Conjugate Heat Transfer, Endothermic Fuel Pyrolysis and Surface Coking of Aviation Kerosene in Ribbed Tube at Supercritical Pressure

Numerical Study on Flow and Heat Transfer of Supercritical Hydrocarbon Fuel in Curved Cooling Channel

Flow and Heat Transfer in a Mini Cooling Channel with Artificial Roughness

Serpentine and furrowed wavy channels-based enhancement in heat transfer for a rocket engine chamber

Effect of Ribs on Heat Transfer and Pressure Drop in a U-Bend Channel With Double-Layer, Dome-Shaped Turning Vanes

Thermal-mechanical Coupling Analysis of the Ribbed Channels in Regenerative Cooling

Enhancement of Laminar Flow Heat Transfer with Single/double-Inclined Ribs for Unilaterally-Heated Channel

Research on the flow and heat transfer characteristics of RP-3 and structural optimization in parallel bending cooling channels

Enhanced Heat Transfer of Supercritical N-Decane in Cooling Channels with Triangular Ribs for Regenerative Cooling

Numerical Investigation of Convective Heat Transfer to Supercritical Pressure Hydrogen in a Straight Tube