Abstract:The regenerative cooling technology has become the most effective method to reduce the high-temperature of the scramjet engine. With physical and chemical heat sink, the endothermic hydrocarbon fuel has excellent performance in the regenerative cooling system of the scramjet engine which operates under extremely high temperature. The pyrolytic reactions not only absorb a large amount of heat, but also produce some kinds of coking precursors, mainly alkenes and aromatics. Because of the coking precursors and the coking reactions, a lot of coke would be generated on the wall and exert strong impact on the heat transfer, as the conductivity of the coke is much lower than that of the metal wall. Meanwhile, the surface coking changes the geometric parameters of the cooling tube, which leads to the flow field variations with the thickening coking layer. So, it is needed to find out the interaction between these variations. In this paper, a one-dimensional (1D) model has been developed to calculate the flow and heat transfer parameters distributions of the pyrolytically reacted RP-3 along the regenerative cooling tube with the pyrolytic coking. The 24-step pyrolytic reaction model and the coking kinetic model are applied to predict the pyrolysis and pyrolytic coking process of RP-3, with accurate computations of the physical properties of fluid mixture which undergo drastic variations during the transcritical process. Comparisons between the current predictions and the open published experimental data are carried out and good agreement is achieved. Calculations on the coupling relationships between the flow, heat transfer, pyrolysis and pyrolytic coking within 20 min in the circular tube have been conducted. With the heat flux increased, the coke mass is rising sharply and the temperature of the outer tube wall rises rapidly owing to the increasing thermal resistance of the coke layer. Moreover, the flow velocity becomes faster during the narrowing process of the tube caused by surface coking. In order to better understand the coking characteristics, further investigations on distributions of the surface coking under heat fluxes of 1.2–2.0MW/m2, pressures of 2.6–7.4 MPa and with inlet velocities of 0–5m/s have been performed. Results reveal that all these factors play an important role in the pyrolytic reactions and the coking rate distributions. The results in this paper have significant reference value in the design of the regenerative cooling system.

Conjugate Heat Transfer, Endothermic Fuel Pyrolysis and Surface Coking of Aviation Kerosene in Ribbed Tube at Supercritical Pressure

Numerical Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Consideration of Fuel Pyrolysis and Surface Coking at Supercritical Pressures

Modeling and Simulation of Supercritical-Pressure Turbulent Heat Transfer of Aviation Kerosene with Detailed Pyrolytic Chemical Reactions

Supercritical-Pressure Heat Transfer, Pyrolytic Reactions, and Surface Coking of N-Decane in Helical Tubes

Model Validation and Parametric Study of Fluid Flows and Heat Transfer of Aviation Kerosene with Endothermic Pyrolysis at Supercritical Pressure

Asymmetric Heating and Buoyancy Effects on Heat Transfer of Hydrocarbon Fuel in a Horizontal Square Channel at Supercritical Pressures

Large Eddy Simulations of Heat Transfer and Thermal Oxidative Coking of Aviation Kerosene in Vertical U-Tube at a Supercritical Pressure

Investigation of Pyrolysis Effect on Convective Heat Transfer Characteristics of Supercritical Aviation Kerosene

Numerical study of supercritical-pressure fluid flows and heat transfer of methane in ribbed cooling tubes

Coupling Process Analysis on the Flow and Heat Transfer of Hydrocarbon Fuel with Pyrolysis and Pyrolytic Coking under Supercritical Pressures

Experimental Study of the Influence of Surface Coke Deposition on Heat Transfer of Aviation Kerosene Rp-3 at Supercritical Pressure

Buoyancy Effects on Supercritical-Pressure Conjugate Heat Transfer of Aviation Kerosene in Horizontal Tubes

Surface Coking Deposition Influences on Flow and Heat Transfer of Supercritical Hydrocarbon Fuel in Helical Tubes

Buoyancy Effect on Heat Transfer and Surface Coking of Hydrocarbon Fuel in Horizontal Square Channel at Supercritical Pressures

Computational Study of Heat Exchange and Thermal Oxidative Coking of Supercritical-Pressure Kerosene with Compressed Air in Counterflows

Numerical investigation of pyrolysis and surface coking of hydrocarbon fuel in the regenerative cooling channel

Experimental Investigation on the Flow and Heat Transfer Characteristics of Aviation Kerosene RP-3 During Thermal Pyrolysis Coking

Effect of pyrolytic reaction of supercritical aviation kerosene RP-3 on heat and mass transfer in the near-wall region

Experiment and Modelling of Supercritical Pyrolysis and Coking of RP-3 Aviation Kerosene in a U-bend Tube

Experimental Investigation on Thermal Cracking and Convective Heat Transfer Characteristics of Aviation Kerosene RP-3 in a Vertical Tube under Supercritical Pressures

Numerical Research on Heat Transfer and Thermal Oxidation Coking Characteristics of Aviation Kerosene RP-3 under Supercritical Pressure