Abstract:Power transformers represent an important part of the capital investment in transmission and distribution substations. The cooling of the windings (electrical coil) depends on the convection of heat, enhanced by the forced circulation of oil through the windings and heat exchangers. The forced circulation of oil combined with the forced circulation of air in the heat exchangers is usually found in mobile transformers, whose compact structure is a challenge in terms of heat transfer rates. An improper design or fabrication problem associated with the assembling of the cooling system may result in an inefficient exchange of heat, which may lead to transformer failure from overheating or a reduction of the life span. In this context, the present work proposes a 2D mathematical model to simulate the winding cooling system of a 138 × 69–34 × 13.8 kV 25 MVA Mobile Power Transformer with the objective of investigating the causes of overheating. The model is implemented in CFD Ansys-Fluent® version 17.0 and validated with experimental data. It is evaluated the velocity and temperature distribution, and the identification of the hot spots on the transformer operating considering the nominal conditions for oil flow rate, inlet temperature, and power dissipated. The hot spot temperatures are compared with the current Brazilian Association of Technical Standards—NBR 5356-2: 2007 Power Transformers Part 2: Heating. After, some geometric and/or operational constraints are artificially imposed on the transformer. Their impact on the velocity and temperature fields, as well as the hot spot temperatures, are mapped in order to verify if they still respect the standard ́s temperature limits and if imposed constraints may lead to the transformer failure. The numerical results clearly illustrate that geometric imperfections in the disks, guides, or axial cooling ducts have a direct impact on oil flow and temperature distributions. These imperfections can also alter the positioning and significantly increase the temperature of the hottest spot within the winding, sometimes even exceeding the requirements of the ABNT NBR 5356:2 standard in certain scenarios. Therefore, the proposed mathematical model serves as a valuable tool for investigating a complex and common issue within the energy distribution system. This issue not only inconveniences the population but also leads to economic challenges each year. Finally, the outcomes of this study can provide engineers with essential insights to enhance the thermal design of power transformers, as well it can assist in guiding maintenance efforts and understanding the root causes of new failures.

Numerical Study of Electromagnetic Loss and Heat Transfer in an Oil-Immersed Transformer

ANALYSIS OF ELECTROMAGNETIC FIELDS AND EDDY CURRENT LOSSES IN LARGE POWER TRANSFORMERS

Temperature simulation of oil-immersed transformerbased on fluid-thermal coupling

Magnetic-Thermal-Flow Field Coupling Simulation of Oil-Immersed Transformer

Research on Transient Electric Field Distribution of High-Frequency Transformers Based on COMSOL and SIMULINK Co-simulation

Research on temperature rise calculation and hot spot temperature inversion method for oil immersed transformer based on magnetic - thermal - fluid

Research on Deterioration Mechanism of Oil-paper Insulation of 220 Kv Current Transformer

Heat dissipation performance analysis and structural parameter optimization of oil-immersed transformer based on flow-thermal coupling finite element method

Magneto-thermal coupling simulation and experimental verification for a three-winding high-frequency transformer

Research on temperature distribution characteristics of oil‐immersed power transformers based on fluid network decoupling

Improved thermal hydraulic network modelling and error analysis in disc‐type transformer windings

Analysis and design of nanofluid-filled power transformers

Simulation calculation of fluid field- thermal field of oil-immersed transformer and optimization of winding structure parameters

Numerical evaluation of the directed oil cooling system of a mobile power transformer

Research on temperature rise characteristics and hot spot temperature inversion method of oil-immersed transformer based on coupling of magnetic-fluid-thermal field

Thermofluidic investigations of oil natural transformer: Closed‐loop modelling and experimental validation

Enhancing heat transfer in power transformer radiators via thermo-fluid dynamic analysis with periodic thermal boundary conditions

Influence of insulation paper on the hot spot temperature of oil-immersed transformer winding

Analysis of Hot Spot Temperature of Dry-Type Transformer Based on Finite Element Method

A Numerical Study on the Heat Transfer Process of Transformer and Embedding System

Study on Thermal Characteristics of Winding under Inter-Turn Fault of Oil-Immersed Transformer