Abstract:Asynchronous circuits with low power and robustness are revived in emerging applications such as the Internet of Things (IoT) and neuromorphic chips, thanks to clock-less and event-driven mechanisms. However, the lack of mature computer-aided design (CAD) tools for designing large-scale asynchronous circuits results in low design efficiency and high cost. This article proposes an end-to-end bundled-data (BD) asynchronous circuit design flow, which can facilitate building asynchronous circuits, even if the designer has little or no asynchronous circuit foundation. Three features that enable this are: 1) a lightweight circuit converter developed in Python can convert circuits from synchronous descriptions to corresponding asynchronous ones at register transfer level (RTL). Desynchronization flow helps designers maintain a "synchronization mentality" to construct asynchronous circuits; 2) a synchronization-like verification method is proposed for asynchronous circuits so that it can be functionally verified before synthesis. Avoids the risk of rework after logic defects are discovered during the synthesis and implementation, as asynchronous circuits often cannot be simulated until gate-level (GL) netlist generation; and 3) the whole implementation flow from RTL to graphic data system (GDS) is based on commercial electronic design automation (EDA) tools. Similar to the design flow of synchronous circuits, it helps designers implement asynchronous circuits with "synchronization habits." Furthermore, to validate this methodology, two asynchronous processors were, respectively, implemented and evaluated in the TSMC 28-nm CMOS process. Compared to their synchronous counterparts, the general-purpose asynchronous RISC-V processor achieves 20.5% power savings. And the domain-specific asynchronous spiking neural network (SNN) accelerator achieves 58.46% power savings and 2.41x energy efficiency improvement at 70% input spike sparsity.

DFT Architecture for Click-Based Bundled-Data Asynchronous Circuits

An Effective BIST Circuit for Barrel Shifter Within 8 Bits MCU

An End-to-End Bundled-Data Asynchronous Circuits Design Flow: from RTL to GDS

A Design Flow for Click-Based Asynchronous Circuits Design with Conventional EDA Tools.

Toward Efficient Asynchronous Circuits Design Flow Using Backward Delay Propagation Constraint

A Method To Transform Synchronous Pipeline Circuits To Bundled-Data Asynchronous Circuits Using Commercial Eda Tools

An Asynchronous Bundled-Data Template with Current Sensing Completion Detection Technique

New Dft Architectures for 3D-Sics with A Wireless Test Port

DSS: Applying asynchronous techniques to architectures exploiting ILP at compile time

Blade-DA: Click-Based Asynchronous Resilient Circuit With Dynamic Delay Adjustment

Design and Implementation of DFT Strategy in ASIC Design of Resilient Packet Ring

Towards Energy-Efficient Asynchronous Circuit Design with Flip-Flop-to-Latch Replacement

A Low-Power Asynchronous RISC-V Processor with Propagated Timing Constraints Method

DFT for IP Cores Based on Deterministic-BIST

Sequential circuit ATPG using combinational algorithms

LAC: A Novel Lightweight Asynchronous Controller with Optimized Phase Shift

Optimize Asynchronous Design by Synchronous Synthesis Tool

A Case Study of Testing Strategy for AI SoC

Design for Testability of a Resilient Packet Ring ASIC

A low power architecture based on unidirectional cut

A unified architecture for speed-binning and circuit failure prediction and detection