Abstract:Asynchronous circuits with low power and robustness are revived in emerging applications such as the Internet of Things (IoT) and neuromorphic chips, thanks to clock-less and event-driven mechanisms. However, the lack of mature computer-aided design (CAD) tools for designing large-scale asynchronous circuits results in low design efficiency and high cost. This article proposes an end-to-end bundled-data (BD) asynchronous circuit design flow, which can facilitate building asynchronous circuits, even if the designer has little or no asynchronous circuit foundation. Three features that enable this are: 1) a lightweight circuit converter developed in Python can convert circuits from synchronous descriptions to corresponding asynchronous ones at register transfer level (RTL). Desynchronization flow helps designers maintain a "synchronization mentality" to construct asynchronous circuits; 2) a synchronization-like verification method is proposed for asynchronous circuits so that it can be functionally verified before synthesis. Avoids the risk of rework after logic defects are discovered during the synthesis and implementation, as asynchronous circuits often cannot be simulated until gate-level (GL) netlist generation; and 3) the whole implementation flow from RTL to graphic data system (GDS) is based on commercial electronic design automation (EDA) tools. Similar to the design flow of synchronous circuits, it helps designers implement asynchronous circuits with "synchronization habits." Furthermore, to validate this methodology, two asynchronous processors were, respectively, implemented and evaluated in the TSMC 28-nm CMOS process. Compared to their synchronous counterparts, the general-purpose asynchronous RISC-V processor achieves 20.5% power savings. And the domain-specific asynchronous spiking neural network (SNN) accelerator achieves 58.46% power savings and 2.41x energy efficiency improvement at 70% input spike sparsity.

A Method To Transform Synchronous Pipeline Circuits To Bundled-Data Asynchronous Circuits Using Commercial Eda Tools

An End-to-End Bundled-Data Asynchronous Circuits Design Flow: from RTL to GDS

A Design Flow for Click-Based Asynchronous Circuits Design with Conventional EDA Tools.

Optimize Asynchronous Design by Synchronous Synthesis Tool

Toward Efficient Asynchronous Circuits Design Flow Using Backward Delay Propagation Constraint

A novel cross-layer framework for early-stage power delivery and architecture co-exploration.

Asynchronous Pipeline VLSI Designing under Synchronous VLSI Design Environment

Design and Tool Flow of a Reconfigurable Asynchronous Neural Network Accelerator

A Low-Power Asynchronous RISC-V Processor with Propagated Timing Constraints Method

DFT Architecture for Click-Based Bundled-Data Asynchronous Circuits

System Level Asynchronous Virtual Pipeline on Dynamically and Partially Reconfigurable Architecture

Towards Energy-Efficient Asynchronous Circuit Design with Flip-Flop-to-Latch Replacement

HPSAP: A High-Performance and Synthesizable Asynchronous Pipeline With Quasi-2phase Conversion Method

Experiment Design of a Synchronous to Asynchronous Converter Based on CPLD/FPGA

Source-code-level Transformation and APT-Driven Parallelism Pre-processes for Embedded System Automated Design

Data Handover Technology of Asynchronous Clock Domain Synchronizer Based on Pipeline Structure

Designing Self-timed Asynchronous Circuits with Chisel

An Asynchronous Bundled-Data Template with Current Sensing Completion Detection Technique

Robust and Energy-Efficient Asynchronous Dynamic Pipelines for Ultra-Low-voltage Operation Using Adaptive Keeper Control

An Efficient Asynchronous Batch Bayesian Optimization Approach for Analog Circuit Synthesis

An Event-Driven Parallel Acceleration Real-Time Simulation for Power Electronic Systems Without Simulation Distortion in Circuit Partitioning