Abstract:In this study, organic structure-directing agents (OSDA) of TPA + are used as templating agents to synthesize zeolites with different topologies, and are also served as protectants for alkali treatment to inhibit the severe silicon extraction from zeolite skeleton. The TPA + cations could be bound to the negatively charged Al sites in the framework, so we prepared a series of Cu-based ZSM-5 catalysts with meso-/microporous composite structure by using TPA + cation as a protectant for alkali treatment and evaluated the pore structures by using the hierarchy factor (HF). The results show the microporous-/mesoporous hierarchical structure of the alkali-etched catalyst with the maximal HF (0.115) effectively improved the low-temperature activity on selective catalytic reduction (SCR) of NO by ammonia, achieving complete NO x to N 2 conversion at 225-400 oC. It was shown that the TPA + cation played an important role on protecting the crystallinity, long-range order, and pore connectivity of zeolites, and substantially widened the mesopore volume with the loss of a small portion of micropores. In addition, the alkali treatment strategy involving protectant was systematically studied, including the corresponding effect on the pore structure, redox ability, acidity, and copper ion dispersion. The N 2 adsorption-desorption experiments revealed that the maximization of the HF can be obtained by adjusting the ratio of protectant to etchant (TPA + /OH - ). Among them, the Cu/ZSM-5 catalyst associated with the ratio of TPA + /OH - =0.4 and the best activity has a maximum surface area of 515 m 2 /g, which enhances the mesopore volume (0.325 cm 3 /g) by approximately three times simultaneously with only a 16.9% loss of the micropore volume (0.154 cm 3 /g). The hierarchically porous zeolites not only enhance the diffusion of mobile hydrated copper ions and ammonia-solvated copper complexes, but also facilitate the dispersion of copper ions. This work provides a feasible strategy to rapidly enhance the low-temperature de NO x efficiency on the zeolite catalysts.

The Investigation of the NH3-SCR Performance of a Copper-Based AEI-CHA Intergrown Zeolite Catalyst.

A controllable zeolite framework stability of Cu/SAPO-34 via adjusting the copper coordination environment for NH 3 -SCR under hydrothermal condition

Characterization of Commercial Cu-SSZ-13 and Cu-SAPO-34 Catalysts with Hydrothermal Treatment for NH3-SCR of NOx in Diesel Exhaust

Cu/SSZ-13 Zeolites Prepared by in Situ Hydrothermal Synthesis Method As NH3-SCR Catalysts: Influence of the Si/Al Ratio on the Activity and Hydrothermal Properties

Catalytic Performances of Cu/MCM-22 Zeolites with Different Cu Loadings in NH3-SCR

Optimizing the distribution and proportion of various active sites for better NH3-SCR property over Cu/SSZ-13

Evolution of Copper Species on Cu/SAPO-34 SCR Catalysts Upon Hydrothermal Aging

Insight into solid-state ion-exchanged Cu-based zeolite (SSZ-13, SAPO-18, and SAPO-34) catalysts for the NH3-SCR reaction: The promoting role of NH4-form zeolite substrates

NH3-SCR on Cu, Fe and Cu + Fe Exchanged Beta and SSZ-13 Catalysts: Hydrothermal Aging and Propylene Poisoning Effects

Direct Synthesis of High Silica Ssz-16 Zeolite with Extraordinarily Superior Performance in Nh3-Scr Reaction

Cu-exchanged Al-rich SSZ-13 zeolite from organotemplate-free synthesis as NH3-SCR catalyst: Effects of Na+ ions on the activity and hydrothermal stability

Selective Catalytic Reduction of NOx with Ammonia over Copper Ion Exchanged SAPO‐47 Zeolites in a Wide Temperature Range

Migration, Reactivity, and Sulfur Tolerance of Copper Species in SAPO-34 Zeolite Toward NOx Reduction with Ammonia

Cu-Exchanged CHA-Type Zeolite from Organic Template-Free Synthesis: an Effective Catalyst for NH3-SCR

Synthesis and evaluation of mesopore structured ZSM-5 and a CuZSM-5 catalyst for NH3-SCR reaction: Studies of simulated exhaust and engine bench testing

Rational design on hierarchically porous Cu/ZSM-5 zeolite for promoting low-temperature NH 3 -SCR performance based on protectively alkali-etching strategy

In-Situ Synthesis of Cu-SSZ-13 Catalyst: Effect of Crystallization Time on NH3-SCR Performance

Influence of Synthesis Method on Catalytic Properties and Hydrothermal Stability of Cu/SSZ-13 for NH3-SCR Reaction

Revealing the Effect of Crystal Size on the High-Temperature Hydrothermal Stability of Cu/SSZ-13 NH3-SCR Catalysts

Exploring the optimal ratio of elemental components of the Cu/SSZ-13 framework: the reformation of NH<sub>3</sub>-SCR properties

Revealing the nature of crystal size on high-temperature hydrothermal stability of Cu/SSZ-13 NH3-SCR catalysts