Abstract:Cu-SSZ-13 zeolite has attracted great interest owing to its extraordinary performance in the selective catalytic reduction of NOx with NH3 (NH3-SCR); however, the high expense in the costly templates for synthesizing SSZ-13 remains a serious obstacle for its application in large scale, which exacts alternative methods to get SSZ-13 of high performance in NH3-SCR at reduced cost. In this work, a series of methods, including the interzeolite conversion from X and Y zeolites (to get SZ-XC and SZ-YC, respectively) and the assistance with seed crystal and fluorine ion (to get SZ-S and SZ-F, respectively), were used to synthesize the Al-rich Cu-SSZ-13 zeolites; the influence of preparation method on the Al distribution, hydrothermal stability and catalytic performance of Cu-SSZ-13 in NH3-SCR was then comparatively investigated. The results indicate that the Cu-SSZ-13 zeolites prepared by various methods are also rather different in the content of paired Al and active Cu2+-2Al species, following the order of SZ-F > SZ-S > SZ-YC > SZ-XC; a positive correlation is observed between the catalytic activity in NH3-SCR and the content of α-Cu2+-2Al species determined by the electron spinning resonance. In particular, the Cu-SSZ-13 zeolite prepared by using fluoride as an assistant (Cu-SZ-F) has much higher fraction of paired Al and active α-Cu2+-2Al species and thereby exhibits better catalytic performance in NH3-SCR, with an NO conversion of nearly 80% at 200 °C under a gaseous hourly space velocity (GHSV) of 240,000 h−1. Moreover, the Cu-SSZ-13 zeolite prepared by the fluoride assistance method also displays less silanol defects and greater hydrothermal stability, showing enormous potential as a practicable catalyst of low cost in the elimination of NOx by NH3-SCR.

Exploring the optimal ratio of elemental components of the Cu/SSZ-13 framework: the reformation of NH<sub>3</sub>-SCR properties

Exploring the optimal ratio of elemental components of the Cu/SSZ-13 framework: the reformation of NH 3 -SCR properties

Optimizing the distribution and proportion of various active sites for better NH3-SCR property over Cu/SSZ-13

In-situ synthesis of Cu-SSZ-13 catalyst: effect of Si/Al ratio on catalytic performance for NH3-SCR

Si/Al Ratio Determines the SCR Performance of Cu-SSZ-13 Catalysts in the Presence of NO2

Cu/SSZ-13 Zeolites Prepared by in Situ Hydrothermal Synthesis Method As NH3-SCR Catalysts: Influence of the Si/Al Ratio on the Activity and Hydrothermal Properties

Cu-SSZ-13 zeolite–metal oxide hybrid catalysts with enhanced SO2-tolerance in the NH3-SCR of NOx

Identification of Active Sites and Reaction Mechanism on Low-Temperature SCR Activity over Cu-SSZ-13 Catalysts Prepared by Different Methods

Study on the Performance of the Zr-Modified Cu-SSZ-13 Catalyst for Low-Temperature NH3-SCR

The Comparative Study of Reaction Mechanisms and Catalytic Performances of Cu–SSZ-13 and Fe–SSZ-13 for the NH3-SCR Reaction

Improvement of Alkali Metal Resistance for NH3-SCR Catalyst Cu/SSZ-13: Tune the Crystal Size

A Multiple-Active-site Cu/SSZ-13 for NH3-SCO: Influence of Si/Al Ratio on the Catalytic Performance

A comparison of Al-rich Cu-SSZ-13 zeolites synthesized by different methods in their Al distribution, hydrothermal stability and catalytic performance in the selective catalytic reduction of NOx with NH3

Effect of Fe Addition on the Structure and SCR Reactivity of One-Pot Synthesized Cu-SSZ-13

Regulation of Al distributions and Cu2+ locations in SSZ-13 zeolites for NH3-SCR of NO by different alkali metal cations

Insight into solid-state ion-exchanged Cu-based zeolite (SSZ-13, SAPO-18, and SAPO-34) catalysts for the NH3-SCR reaction: The promoting role of NH4-form zeolite substrates

In-situ One-Pot Synthesis of Ti/Cu-SSZ-13 Catalysts with Highly Efficient NH3-SCR Catalytic Performance as Well as Superior H2O/SO2 Tolerability

Influence of Framework n(Si)/n(Al) Ratio on the Nature of Cu Species in Cu‐ZSM‐5 for NH3‐SCR‐DeNOx

Influence of Synthesis Method on Catalytic Properties and Hydrothermal Stability of Cu/SSZ-13 for NH3-SCR Reaction

Effect of Ion-Exchange Sequences on Catalytic Performance of Cerium-Modified Cu-SSZ-13 Catalysts for NH3-SCR

A controllable zeolite framework stability of Cu/SAPO-34 via adjusting the copper coordination environment for NH 3 -SCR under hydrothermal condition