Abstract:Electroshock treatment (EST) can influence the microstructure of a material in a short time through the coupling of the thermal and nonthermal effects of a high-density pulsed current. In this study, a Ti-55531 near-β titanium alloy manufactured by a laser-based directed energy deposition was processed via EST, and the microstructure was characterized via scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD). After the EST, small subgrains were precipitated in the large columnar β grains. With an increase in the EST time, the α phase precipitated along the grain boundary tended to grow, the curvature radius of the α tips increased, and distinct spheroidization occurred. The EBSD results indicated that after the EST, the maximum texture intensity of the β phase decreased from 23.18 to 13.15, and the texture intensity exhibited a uniform distribution. The foregoing results were attributed to the thermal and nonthermal effects of the EST, which led to an energy concentration on the tips of the needle-like α phase and the phase transformation of the tips. When the high current passes through the sample, both the thermal and nonthermal effects are introduced, the thermal effect cause the increase of sample's temperature, and the nonthermal effect shows as the form of special forces such as the electrostatic and electronic wind forces, which can influence the movement of dislocation. This work is expected to provide a new method for optimizing the microstructure of the near-β titanium alloys manufactured by a laser-based directed energy deposition.

Effect of Electroshocking Treatment on the Microstructure and Mechanical Properties of Laser Melting Deposited Near-Β Ti-55531 Thin-Wall

Influence of Electroshocking Treatment on Microstructure and Mechanical Properties of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Thin-Wall Specimen Manufactured by Laser Melting Deposition

Influence mechanism of microstructure variation on mechanical properties of laser melting deposition Ti–6Al–4V alloy under electroshocking treatment

Effects of Electroshock Treatment on Microstructure Evolution and Texture Distribution of Near-Β Titanium Alloy Manufactured by Directed Energy Deposition

Electroshock Treatment Dependent Microstructural Evolution and Mechanical Properties of Near-Β Titanium Alloy Manufactured by Directed Energy Deposition

Investigation on the Effect of Electroshock Treatment on the Microstructure and Mechanical Properties of Ti-45Al-5Nb Alloy

Recrystallization Behavior of Ti–6.5Al–3.5Mo–1.5Zr–0.3Si Alloy under Electroshocking Treatment

Microstructure Evolution and Mechanical Property Response of TC11 Titanium Alloy under Electroshock Treatment

Evaluation of Microstructure Variation of TC11 Alloy after Electroshocking Treatment

Effect and Mechanism of Electroshock Treatment on Microstructure and Mechanical Properties of (Tib+tic)/ti-6Al-4v Composite

Evolution mechanism of grain orientation and texture distribution of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy under electroshocking treatment

Microstructural and texture evolution investigation of laser melting deposited TA15 alloy at 500?C using in-situ EBSD tensile test

Local Strain Evolution Near Α/β Interface in TC11 Titanium Alloy under Electroshocking Treatment

In-situ SEM characterization of fracture mechanism of TiB/Ti-2Al-6Sn titanium matrix composites after electroshocking treatment

Evolution of Microstructure and Hardness of TC11 Titanium Alloy under Different Electroshocking Treatment Directions

Microstructural evolution and tensile property enhancement of remanufactured Ti6Al4V using hybrid manufacturing of laser directed energy deposition with laser shock peening

Heat-treatment induced microstructural evolution and enhanced mechanical property of selective laser melted near β Ti-5Al-5Mo-5 V-3Cr-1Zr alloy

Strengthening Effect in Laser Metal Deposited Ti6Al4V Alloy Via Layer-by-layer Ultrasonic Impact Treatment

Microstructural Evolution and Stress State Related to Mechanical Properties of Electron Beam Melted Ti-6Al-4V Alloy Modified by Laser Shock Peening

Novel Approach of Electroshock Treatment for Defect Repair in Near-β Titanium Alloy Manufactured Via Directed Energy Deposition

Microstructure evolution and mechanical properties of a lamellar near-α titanium alloy treated by laser shock peening