Abstract:Milling stability is a function of the tool point frequency response functions (FRFs), which vary with the movements of the moving parts within the whole machine tool work volume. The position-dependent tool point FRFs result in uncertain prediction of the stability lobe diagram (SLD) for chatter-free machining parameter selection. Taking the variations of modal parameters to represent the variations of tool point FRFs, this paper introduces the edge theorem to predict the robust milling chatter stability. The application of the edge theorem requires the minimum and maximum modal parameters within the machining space defined by the machining position and machining allowance information. Then, radial basis function artificial neural networks (RBFANNs) are used to predict the position-dependent modal parameters in X and Y directions based on the sample information of machining positions and related modal parameters at the tool point. Moreover, sample machining spaces are determined based on the aforementioned sample positions, and the trained RBFANNs are used to obtain corresponding sample extreme modal parameters. On this basis, RBFANNs for predicting the position and machining allowance-dependent extreme modal parameters can also be trained, and they are combined with the edge theorem and zero exclusion condition to calculate robust pairs of the spindle speed (n) and limiting axial cutting depth (aplim) and then plot the robust SLD (RSLD). A case study was performed on a real three-axial vertical machining center, and the plotted RSLD considering position variations was compared with the traditional SLD. Results of the chatter tests show that the RSLD can provide more reliable (ap, n) pairs to guarantee the milling stability, validating the feasibility of the proposed robust milling chatter stability prediction method.

Milling Chatter Mitigation with Projection-Based Robust Adaptive Controller and Active Magnetic Bearing

Active Control of Milling Chatter Based on the Built-in Force Actuator

Stability and Control for Cutting Chatter Based on Active Magnetic Bearings

Suppression of Chatter for Precision Hole Boring Based on Variable Structural Stiffness

Active Suppression of Milling Chatter with LMI-based Robust Controller and Electromagnetic Actuator

Active Chatter Suppression for Milling Process with Sliding Mode Control and Electromagnetic Actuator

Active Damping of Milling Chatter Vibration Via a Novel Spindle System with an Integrated Electromagnetic Actuator

The Active Vibration Attenuation of A Built-In Motorized Milling Spindle

Magnetorheological fluid-controlled boring bar for chatter suppression

Parameter Optimization of Time-Varying Stiffness Method for Chatter Suppression Based on Magnetorheological Fluid-Controlled Boring Bar

Active Suppression of Milling Chatter Based on LQR-ANFIS

Investigation on Adaptive Filter for On-Line Detection and Active Control of Chatter Vibration in Milling Process

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

Robust Chatter Stability Prediction of the Milling Process considering Uncertain Machining Positions

Controlling harmful milling vibration for robotic milling system based on the optimization of milling posture and spindle speed

Mode Coupling Chatter Suppression for Robotic Machining Using Semi-Active Magnetorheological Elastomers Absorber

Suppress Chatter in Milling of Thin-Walled Parts Via Fixture with Active Support

All-coefficient Adaptive Control of Active Magnetic Bearing System Based on Characteristic Model

Adaptive backstepping dynamic sliding mode control for maglev turning motor spindle based on limited time preset performance

Effect of the Cutter Path and the Workpiece Clamping Position on the Stability of the Robotic Milling System

Tool path optimization with stability constraints for ball-end milling cutters based on frequency domain controlling strategy