Abstract:Despite recent advances and improvements in modeling and prediction of the dynamics of the machining process, an efficient machining process is limited due to chatter and instability of machining system. In fact, the machining system contains various kinds of joints, which cause difficulties in dynamics modeling, simulation and prediction. Moreover, the flexible support system results in large deformation and violent vibration of the workpiece when machining, and the thin-walled workpiece easily gives rise to the chatter of the machining system. Therefore, the dynamics of the flexible support system was considered to calculate stability lobe diagram in the modeling of milling process. The whole machining system was regarded as a closed loop composed by the machine tool structures, support, workpiece and machining process. In this paper, the receptance coupling (RC) method was introduced to predict the dynamics of the closed machining system. A milling process was taken for example to predict the chatter limitations using the dynamics of closed model. The mathematical model of the machining system (machine tool structures, spindle, holder and tool), together with the details of joint contacts, was given based on the RC method. The RC model was used to obtain the dynamics of the system, while receptance of the tool point was coupled. Based on the coupling model of the machining system, the depth limitations under different speeds were estimated for the technology parameter optimization in milling process. The response was considered to be the sum of the cutting point and the support system. The flexibility of the support system was considered to be the feedback of the cutting stiffness. By this means, the traditional model was modified to calculate the stability lobe diagram based on the dynamics of the spindle and support system. Furthermore, the milling experiment was carried out to verify the prediction results, and the dominant natural frequencies of receptance at tool point were obtained by modal testing to define the stability lobe diagram. It was found that the chatter results matched well with the stability lobes. It was concluded that the support system with poor stiffness might cause violent chatter especially when the workpiece was thin-walled. The cutting depth limitations of the flexible support system were lower than that of the rigid one. Moreover, this closed model of the machining system is appropriate for the chatter prediction of the flexible support system or thin-walled workpiece, so it is helpful for a better parameter optimization.

Tool path optimization with stability constraints for ball-end milling cutters based on frequency domain controlling strategy

Experimental and simulation study on chatter stability region of integral impeller with non-uniform allowance.

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

A novel approach of stability and topography prediction in five-axis ball-end milling process through workpiece-edge-coupling

Effect of the Cutter Path and the Workpiece Clamping Position on the Stability of the Robotic Milling System

Research on the influence of robot structural mode on regenerative chatter in milling and analysis of stability boundary improvement domain

Controlling harmful milling vibration for robotic milling system based on the optimization of milling posture and spindle speed

Chatter Stability Prediction of Ball-End Milling Considering Multi-Mode Regenerations

Tool Orientation Sequence Smoothing Method Based on the Discrete Domain of Feasible Orientations

Active Control of Milling Chatter Based on the Built-in Force Actuator

Research on milling stability of thin-walled parts based on improved multi-frequency solution

Optimization analysis considering the cutting effects for high-speed five-axis down milling process by employing ball end mill

Cutting dynamics research on the five-axis machining of thin curved surface with barrel-taper-ball milling cutter

Modeling of variable-pitch/helix milling system considering axially varying dynamics with cutter runout offset and tilt effects

Milling Chatter Mitigation with Projection-Based Robust Adaptive Controller and Active Magnetic Bearing

Optimizing the micro-texture and cutting parameters of ball-end milling cutters to achieve milling stability

Collision-free and smooth path generation method of five-axis ball-end milling considering effective tool diameter change

Modal parameter identification of general cutter based on milling stability theory

A continuous oscillating milling strategy based on uniform wear theory for improving the service life of the ball-end cutter

Stability Prediction of Milling Process with Closed Machining System Dynamics with Flexible Thin-Walled Workpiece

Stability analysis for milling system with variable pitch cutters under variable speed