Abstract:Despite recent advances and improvements in modeling and prediction of the dynamics of the machining process, an efficient machining process is limited due to chatter and instability of machining system. In fact, the machining system contains various kinds of joints, which cause difficulties in dynamics modeling, simulation and prediction. Moreover, the flexible support system results in large deformation and violent vibration of the workpiece when machining, and the thin-walled workpiece easily gives rise to the chatter of the machining system. Therefore, the dynamics of the flexible support system was considered to calculate stability lobe diagram in the modeling of milling process. The whole machining system was regarded as a closed loop composed by the machine tool structures, support, workpiece and machining process. In this paper, the receptance coupling (RC) method was introduced to predict the dynamics of the closed machining system. A milling process was taken for example to predict the chatter limitations using the dynamics of closed model. The mathematical model of the machining system (machine tool structures, spindle, holder and tool), together with the details of joint contacts, was given based on the RC method. The RC model was used to obtain the dynamics of the system, while receptance of the tool point was coupled. Based on the coupling model of the machining system, the depth limitations under different speeds were estimated for the technology parameter optimization in milling process. The response was considered to be the sum of the cutting point and the support system. The flexibility of the support system was considered to be the feedback of the cutting stiffness. By this means, the traditional model was modified to calculate the stability lobe diagram based on the dynamics of the spindle and support system. Furthermore, the milling experiment was carried out to verify the prediction results, and the dominant natural frequencies of receptance at tool point were obtained by modal testing to define the stability lobe diagram. It was found that the chatter results matched well with the stability lobes. It was concluded that the support system with poor stiffness might cause violent chatter especially when the workpiece was thin-walled. The cutting depth limitations of the flexible support system were lower than that of the rigid one. Moreover, this closed model of the machining system is appropriate for the chatter prediction of the flexible support system or thin-walled workpiece, so it is helpful for a better parameter optimization.

Suppress Chatter in Milling of Thin-Walled Parts Via Fixture with Active Support

Suppression of Chatter for Precision Hole Boring Based on Variable Structural Stiffness

Experimental and simulation study on chatter stability region of integral impeller with non-uniform allowance.

Investigation of Moving Fixture on Deformation Suppression During Milling Process of Thin-Walled Structures

Active Control of Milling Chatter Based on the Built-in Force Actuator

Parameter Optimization of Time-Varying Stiffness Method for Chatter Suppression Based on Magnetorheological Fluid-Controlled Boring Bar

Active Damping of Milling Chatter Vibration Via a Novel Spindle System with an Integrated Electromagnetic Actuator

Active Chatter Suppression for Milling Process with Sliding Mode Control and Electromagnetic Actuator

Application of Mirror-Milling Machining System to Suppress Vibration in Thin Plate Work-Piece

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Active Suppression of Milling Chatter with LMI-based Robust Controller and Electromagnetic Actuator

The Active Vibration Attenuation of A Built-In Motorized Milling Spindle

Stability and Control for Cutting Chatter Based on Active Magnetic Bearings

Milling Chatter Mitigation with Projection-Based Robust Adaptive Controller and Active Magnetic Bearing

Suppressing Milling Chatter of Thin-Walled Parts by Eddy Current Dampers

Investigation on chatter stability of thin-walled parts milling considering the effects of fixture support force and tool position

Active Vibration Control of Thin Plate Milling Using Piezoelectric Actuator

Stability Prediction of Milling Process with Closed Machining System Dynamics with Flexible Thin-Walled Workpiece

Research on milling stability of thin-walled parts based on improved multi-frequency solution

Active Suppression of Milling Chatter Based on LQR-ANFIS

Digital Modeling-Driven Chatter Suppression for Thin-Walled Part Manufacturing