Abstract:During the robotic milling process, vibration is one of the main factors that affect the machining accuracy and surface quality due to the low stiffness of the robot structure. Intelligent material, magnetorheological elastomer (MRE), owns the features of adjustable stiffness, reversible and fast response, has been gradually used for vibration suppression. Therefore, to suppress the forced vibration for robotic milling, this paper used the principle of vibration absorption and combined it with MRE material to design a snubber. A series of excitation and milling experiments were carried out to evaluate its vibration attenuation characteristics. In the excitation experiment, sine signals with frequencies of 40 Hz, 42.02Hz and 60Hz with the same amplitude of 5N were applied to the MRE absorber. In the milling experiment, the dominant frequencies under speeds of 800RPM, 840RPM and 1200RPM were analyzed first. Then, the vibration mitigation characteristics of MRE absorber during robot milling of aluminum alloy were explored by adjusting the current. Experimental results showed that under the action of MRE absorber, the acceleration responses are suppressed effectively. In detail, after tuning the current, the amplitude and the root mean square of vibration acceleration in three directions of sinusoidal excitation could be suppressed by more than 19.23% and 7.35% correspondingly. The power spectral density value of the peak frequency could be reduced by more than 69.13%. In milling experiments, the MRE absorber also achieved certain vibration absorption effects. Furthermore, the surface roughness of the workpiece was also fallen by more than 16.51% which provides support for further engineering application in the field of robotic milling. Undoubtedly, the absorber needs further optimization to achieve better vibration suppression ability and a larger working bandwidth.

Mode Coupling Chatter Suppression for Robotic Machining Using Semi-Active Magnetorheological Elastomers Absorber

Magnetorheological elastomer absorber-based chatter suppression in robotic milling

Suppression of Chatter for Precision Hole Boring Based on Variable Structural Stiffness

Magnetorheological fluid-controlled boring bar for chatter suppression

Parameter Optimization of Time-Varying Stiffness Method for Chatter Suppression Based on Magnetorheological Fluid-Controlled Boring Bar

Modeling and experimental evaluation of vibration reduction of hydraulic-driven joint with a MRF damper

Integrated Dynamic Characteristics and Application in Semi-Active Dynamic Absorber of Magneto-Rheological Fluids

Experimental study on vibration suppression for robotic milling using an MRE absorber

Chatter suppression by parametric excitation: Model and experiments

Measurement and Analysis of Dynamic Characteristics of Magnetorheological Intelligent Boring Bar

Active Chatter Suppression for Milling Process with Sliding Mode Control and Electromagnetic Actuator

Research on the Boring Chatter Suppression Based on MR Fluid

Active Suppression of Milling Chatter with LMI-based Robust Controller and Electromagnetic Actuator

Active Control of Milling Chatter Based on the Built-in Force Actuator

Stability and Control for Cutting Chatter Based on Active Magnetic Bearings

Active Damping of Milling Chatter Vibration Via a Novel Spindle System with an Integrated Electromagnetic Actuator

Milling Chatter Mitigation with Projection-Based Robust Adaptive Controller and Active Magnetic Bearing

MICRO-VIBRATION SUPPRESSION OF EQUIPMENT SUPPORTED ON A SANDWICH BEAM INCORPORATING MAGNETO-RHEOLOGICAL ELASTOMER (MRE) CORE

A new magnetorheological elastomer torsional vibration absorber: structural design and performance test

DYNAMIC BEHAVIOUR OF SHEAR-TYPE MAGNETORHEOLOGIC GREASE DAMPER ROTOR SYSTEM

Magneto-Rheological Elastomer (mre) Based Composite Structures for Micro-Vibration Control