Abstract:Satellites are subject to severe vibrations during flight. These vibrations are induced by multiple sources during liftoff and the instant of final separation. Severe vibrations may cause damage to satellites. For this reason a payload adaptor is needed. Magnetorheological (MR) damper can be utilized to keep the satellites safe. But the common MR damper can't be used in cases of high-frequency vibrations because of stiffness hardening. For this reason, a new MR damper with decoupling mechanism has been designed by adding a decoupling sheet to the common MR damper. The decoupling mechanism makes the damper sensitive to vibration. This means that the damper has different stiffness and damping in case of different vibration amplitude. Based on the Bingham model, the model of the suggested MR damper has been built, and mathematical formulas has been deduced for dynamic stiffness, delay angle and transmissibility of the damper. Dynamic characteristics have been simulated. The results show that the decoupling sheet doesn't work in case of low frequency and high amplitude vibration and the damper presents high damping. In case of high frequency and low amplitude vibration, the decoupling sheet works and the damper presents small damping and stiffness. Thus the stiffness hardening has been avoided. Influence of internal sub structure resonance can be reduced by choosing appropriate parameters. This damper can be used for semi-active control of broadband vibration.

Measurement and Analysis of Dynamic Characteristics of Magnetorheological Intelligent Boring Bar

Suppression of Chatter for Precision Hole Boring Based on Variable Structural Stiffness

Parameter Optimization of Time-Varying Stiffness Method for Chatter Suppression Based on Magnetorheological Fluid-Controlled Boring Bar

Magnetorheological fluid-controlled boring bar for chatter suppression

Dynamic Model of Magnetorheological Intelligent Boring Bar

Research on the Boring Chatter Suppression Based on MR Fluid

Experimental Investigations on the Nonlinear Dynamics of Magnetorheological Dampers

Dynamic Characteristics and Modeling of A New Magnetorheological Damper for Broadband Vibration Control

Integrated Dynamic Characteristics and Application in Semi-Active Dynamic Absorber of Magneto-Rheological Fluids

Chatter suppression by parametric excitation: Model and experiments

Research on Improved Magnetorheological Damper for Wide-Band Vibration Control

Optimal Design of Magnetic System for the Magnetorheological Intelligent Damper

Dynamic analysis and vibration control of two-degree-of-freedom boring bar with fractional-order model of magnetorheological fluid

Research On Dynamic Characteristics Of A Magnetorheological Damper With Decoupling Mechanism

Research on Multi-Parametric Coupling Design Method of Deformable Boring Bar in Embedded Giant Magnetostrictive Actuator

Stability and Control for Cutting Chatter Based on Active Magnetic Bearings

Analysis of the Vibration Characteristics of a Boring Bar with a Variable Stiffness Dynamic Vibration Absorber

DYNAMIC BEHAVIOUR OF SHEAR-TYPE MAGNETORHEOLOGIC GREASE DAMPER ROTOR SYSTEM

Analysis of Cutting Stability of a Composite Variable-Section Boring Bar with a Large Length-to-Diameter Ratio Considering Internal Damping

An Experimental Study into Dynamic Behavior of a Magnetorheological Fluid Squeeze Film Damper – Overhung Flexible Rotor

On-line Measurement of Supporting Characteristics of an Active Magnetic Levitations with Unknown Transfer Function