Abstract:Journal of Low Frequency Noise, Vibration and Active Control, Ahead of Print. Tool vibration is a key factor that affects surface finish, generates noise, and reduces the tool life during conventional boring because of the excessive overhanging length of the tool holder. The interaction between the dynamics of the machine tool and the boring process led to progressive vibration. The creation of appropriate mechanisms in reducing tool vibration will help manufacturing industries to become more productive. In this research, in order to control vibration in the overhanging boring bar, a passive vibration control method was employed. Constrained layer dampers consist of boring bar, substrate, and elastic materials and it is used to minimize tool vibration produced during boring operation. The investigation utilized computational analysis through the ANSYS Workbench platform, employing key parameters such as the overhanging length of the tool holder (100, 150, and 200 mm), substrate material (aluminum, brass, and copper), and elastic material (Nitrile rubber, Natural rubber, and polyurethane). A comprehensive series of 27-run boring experiments were conducted to assess the impact of the constrained layer damper on tool vibration and cutting properties. The results of the study revealed remarkable improvements in various performance metrics. The constrained layer damper demonstrated an impressive 98% reduction in tool vibration, signifying its efficacy in dampening vibrational forces during the boring operation. Furthermore, a substantial 83% decrease in surface roughness was observed, indicating enhanced machining precision and surface finish. The constrained layer damper also exhibited a noteworthy 97.5% reduction in tool wear, highlighting its ability to significantly prolong tool life under challenging machining conditions.

Analysis of the Vibration Characteristics of a Boring Bar with a Variable Stiffness Dynamic Vibration Absorber

Suppression of Chatter for Precision Hole Boring Based on Variable Structural Stiffness

Measurement and Analysis of Dynamic Characteristics of Magnetorheological Intelligent Boring Bar

Vibration Analysis and Suppression in Robotic Boring Process

Parameter Optimization of Time-Varying Stiffness Method for Chatter Suppression Based on Magnetorheological Fluid-Controlled Boring Bar

On the Analysis of A Piecewise Nonlinear-Linear Vibration Isolator with High-Static-Low-Dynamic-Stiffness under Base Excitation

Finite Element Simulation and Experimental Analysis of Robotic Boring Based on an Approach of Equivalent Stiffness

Magnetorheological fluid-controlled boring bar for chatter suppression

DYNAMIC MODELING AND VIBRATION PROPERTY ANALYSIS OF A BOREHOLE VIBRATOR

Ultrasonic vibration–assisted chatter suppression for deep hole boring of stainless steel

Vibration Analysis and Suppression in Robotic Hole Chamfering Process

Research on Multi-Parametric Coupling Design Method of Deformable Boring Bar in Embedded Giant Magnetostrictive Actuator

Research on the Boring Chatter Suppression Based on MR Fluid

Dynamic analysis and vibration control of two-degree-of-freedom boring bar with fractional-order model of magnetorheological fluid

Analysis of Cutting Stability of a Composite Variable-Section Boring Bar with a Large Length-to-Diameter Ratio Considering Internal Damping

Effect of metallic substrate and rubber elastic materials over passive constrained layer damping on tool vibration during boring process

Dynamic analysis and vibration reduction of mechanical-hydraulic coupled tunnel boring machine (TBM) main drive system

Study of Adaptive Tuned Vibration Absorber and Its Dynamic Properties

Finite Element Modeling of Nonlinear Active and Passive Dampers Applied to Vibration Controls

A DVA-Beam Element for Dynamic Simulation of DVA-Beam System: Modeling, Validation and Application

Design and Analysis of a Vibration Isolator with Adjustable High Static–Low Dynamic Stiffness