Abstract:Polyimide aerogels display excellent mechanical strength, high thermal stability, low thermal conductivity, and outstanding dielectric properties. Typically, the synthesis of polyimide aerogels involves the polycondensation of dianhydride and diamine into poly(amic acid) (PAA) oligomers, which are then cross-linked and chemically imidized into polyimide. The stoichiometry of dianhydride and diamine determines the number of repeat units and length of the PAA oligomers, which in turn determines the cross-linking density. Despite the critical role of polymer concentration and number of repeating units in determining the microstructure and properties of polyimide aerogels, few detailed studies exist on these two parameters. Here, we synthesized and characterized 16 polyimide aerogel formulations from the common monomers biphenyl-3,3′,4,4′-tetracarboxylic dianhydride (BPDA) and 4,4′-oxydianiline (ODA), with different repeat units ( n = 5, 15, 30, 45) and total polymer concentrations (4, 7, 10, 13 wt%). An increased polymer concentration accelerated gelation and enhanced the mechanical performance of aerogels, but surprisingly, it also led to higher volumetric shrinkage during aging, solvent exchange, and supercritical drying (SCD). Specific surface areas (SSAs) reached a maximum at intermediate polymer concentrations. A shorter oligomer chain length, i.e., a higher cross-linking density, led to moderately higher SSAs (between 320 and 400 m 2 /g) and reduced shrinkage, resulting in lower densities for a given polymer concentration. The density dependence of the thermal conductivity exhibits a pronounced U -shaped curve with a minimum in thermal conductivity of 21–23 mW/(m·K) between 0.080 and 0.120 g/cm 3 , with somewhat lower values for more highly cross-linked aerogels. This systematic study of polyimide aerogels forms the basis for designing polyimide aerogels with tailored properties for targeted applications.

Preparation of a Structural Polyimide Foam Plastic Based on a Bulk Copolymer of Acrylonitrile and Methacrylic Acid

Preparation and Property of Polyimide Foams

Studies on Polyimide Foams Prepared from Poly(Ester-amine Salt) Precursor Powder

Preparation and Dielectric Properties of Polyimide Foams Containing Crosslinked Structures

Synthesis of poly(propylene glycol)-grafted polyimide precursors and preparation of nanoporous polyimides

Novel Diacetylinic Aryloxysilane Polymers: A New Thermally Cross-Linkable High Temperature Polymer System

Closed-Cell Rigid Polyimide Foams for High-Temperature Applications: The Effect of Structure on Combined Properties

INFLUENCE OF THE CHEMISTRY OF THE FOAMING COMPOSITION ON THERMAL AND MECHANICAL PROPERTIES OF THE FORMING POLYIMIDE FOAM

Preparation and Properties of High-Temperature-Resistant, Lightweight, Flexible Polyimide Foams with Different Diamine Structures

Fabrication of rigid polyimide foams via thermal foaming of nadimide-end-capped polyester-amine precursor

Lightweight thermo- and heat-resistant composite materials based on polyimide foam

STUDY ON THE SYNTHESIS AND PROPERTIES OF POLYIMIDE FOAMS

Carbamate Thermal Decarboxylation for the Design of Non-Isocyanate Polyurethane Foams

A study of chemical composition and physical-mechanical properties of rigid polyurethane-polyisocyanurate foams changes under conditions of extreme heating

A Novel Vacuum-Assisted Method for Fabricating Flexible Polyimide Foams from 3,3′,4,4′-Oxydiphthalic Anhydride/4,4′-Oxydianiline

Compressive Mechanical Behavior and Corresponding Failure Mechanism of Polymethacrylimide Foam Induced by Thermo-Mechanical Coupling

Effect of polymer concentration and cross-linking density on the microstructure and properties of polyimide aerogels

The Molecular Structure Control of Butyl Methacrylate/acrylamide (Co)polymers

Mechanical and thermal properties of porous polyimide monoliths crosslinked with aromatic and aliphatic triamines

Thermal Mechanical Testing of Low Density Thermoplastic Foam

Preparation, Characterization, and Mechanical Properties of Microcellular Poly(Aryl Ether Ketone) Foams