Abstract:In this study, heterocyclic diamine 2-(4-aminophenyl)-5-aminobenzimidazole (APBIA) was employed as a co-polymerization component to improve the properties of polyimide foams (PIFs) which were synthesized from 3,3′,4,4′-benzophenone tetracarboxylic acid dianhydride (BTDA) and 4,4′-diaminodiphenyl ether (ODA). The rheological behavior of polyester ammonium salt (PEAS) precursors was regulated by introducing APBIA moieties to the chain backbones, which affected the foaming behavior of PEAS and the microstructure of corresponding PIFs. Anisotropic porous structure was constructed with the help of microwave-assisted foaming strategy due to the directional growth of foam pores, which led to anisotropic mechanical and thermal insulation performance of resultant PIFs. PIFs demonstrated robust mechanical performance in the vertical direction (i.e., parallel to pore growth direction) and mechanical flexibility (compression response rate of 97.1–99.0 %) in the horizontal direction (i.e., perpendicular to the pore growth direction). The co-polymerized PIFs also presented excellent thermal insulation performance, with thermal conductivity ranging from 0.0266 to 0.0517 W/(m·K) within a temperature range of 25∼300 °C. In addition, PIFs exhibited exceptional thermal stability and flame retardancy performance, which demonstrate a great potential for high-temperature thermal protection applications. To summarize, multifunctional PIFs with excellent mechanical, thermal insulation and flame retardancy were successfully prepared by adopting co-polymerization strategy and microwave-assisted foaming technique, which have promising applications in high-end engineering sectors.

Fabrication of rigid polyimide foams via thermal foaming of nadimide-end-capped polyester-amine precursor

Synthesis of poly(propylene glycol)-grafted polyimide precursors and preparation of nanoporous polyimides

Studies on Polyimide Foams Prepared from Poly(Ester-amine Salt) Precursor Powder

Preparation of Open-Cell Rigid Polyimide Foam via Nonaqueous High Internal Phase Emulsion-Templating Technique

Preparation and Properties of High-Temperature-Resistant, Lightweight, Flexible Polyimide Foams with Different Diamine Structures

Fabrication of Lightweight Polyimide Foams with Exceptional Mechanical and Thermal Properties

Preparation and Property of Polyimide Foams

Preparation and Dielectric Properties of Polyimide Foams Containing Crosslinked Structures

Closed-Cell Rigid Polyimide Foams for High-Temperature Applications: The Effect of Structure on Combined Properties

Polyimide Foams with Ultralow Dielectric Constants

Fabrication of multifunctional polyimide foams with co-polymerized benzimidazole moieties for excellent thermal insulation and flame retardancy applications

A Novel Vacuum-Assisted Method for Fabricating Flexible Polyimide Foams from 3,3′,4,4′-Oxydiphthalic Anhydride/4,4′-Oxydianiline

Lightweight thermo- and heat-resistant composite materials based on polyimide foam

Fabrication of Rigid Isocyanate-Based Polyimide Foam Achieved Excellent Use Safety via Synergy between Expandable Graphite and Phosphorus-Containing Polyol

Synthesis of porous polyimide films with low dielectric constant and excellent mechanical properties by ambient pressure drying

Poly(ether imide)/Epoxy Foam Composites with a Microcellular Structure and Ultralow Density: Bead Foam Fabrication, Compression Molding, Mechanical Properties, Thermal Stability, and Flame-Retardant Properties

Novel Synthesis of Polyimide Foams with Aromatic and 1,6-Diaminohexane Imide Bonding

Lightweight and stiff carbon foams derived from rigid thermosetting polyimide foam with superior electromagnetic interference shielding performance

Polyimide/Poly(Styrene-Co-4-Vinylpyridine) Nanocomposite Films As Precursors for the Preparation of Polyimide Nanofoams

Hybrid Polyimide Foams with Hyperbranched Organosilicon for High-Temperature Sound Absorption

Mechanically Reinforced Rigid Polyimide Foam via Chemically Grafting Isocyanate Acid for Ultrabroad Band Microwave Absorption