Abstract:In order to study the effect of oxygen impurities on corrosion behavior, the platform for supercritical carbon dioxide corrosion experiment was built. The effect of oxygen impurities on the corrosion characteristics of heat-resistant steel T91, 310S and Inconel 625 was studied in supercritical carbon dioxide environment with oxygen concentration of 10 -4 . The corrosion mass increase, phase composition of corrosion products, surface morphology and element distribution were analyzed by means of weighing, X-ray diffraction, scanning electron microscopy and energy dispersive spectrometer. Results show that the corrosion mass increase of T91, 310S and Inconel 625 in supercritical carbon dioxide environment containing oxygen impurities was 1.36, 1.55 and 3.19 times higher than that in high-purity carbon dioxide environment, respectively. In supercritical carbon dioxide environment containing oxygen impurities, the content of Fe 2 O 3 in T91 corrosion products increases, a large amount of vane-like Cr 2 O 3 appeares on 310S surface, and nodules on the surface of Inconel 625 disappear. Compared with the high-purity carbon dioxide environment, the mass fraction of carbon on the surface of the three materials has been greatly reduced to about 5% in supercritical carbon dioxide environment containing oxygen impurities. Besides, the corrosion mass increase curves of three materials obey the parabolic law, and the corrosion resistance of 310S and Inconel 625 is significantly better than that of T91.

Effect of Oxygen Concentration on the Corrosion Behavior of Cr-coated Ni Alloy in Supercritical Water Oxidation Environment

Study on Corrosion Characteristics of Heat-resistant Materials in Supercritical Carbon Dioxide Environment Containing Oxygen Impurities

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

Under-deposit Corrosion of Cr-coated Ni-based Alloys in Supercritical Water Oxidation Environment at 500 °C

Effect of Low Oxygen Concentration on the Oxidation Behavior of Ni-based Alloys 625 and 825 in Supercritical Water

Superior Protective Performance of Ni Cr Coating on Stainless Steel 316L in Pure, Oxygenated and Chlorinated Supercritical Water

Effect of oxygen concentrations on the corrosion behavior of a duplex-phase FeNiCrCuAl high entropy alloy in supercritical water

Microstructural understanding of the oxidation and inter-diffusion behavior of Cr-coated Alloy 800H in supercritical water

Studies on Corrosion Behavior of a Single-Crystal Superalloy and Its Sputtered Nanocrystalline Coatings with Solid NaCl Deposit in O2 + 38 Vol.% H2O Environment at 700 °C

CORROSION BEHAVIOR OF SUPER-AUSTENITIC STAINLESS STEEL AL-6XN IN SUPERCRITICAL WATER

Insights into Oxidation and Nitridation of Alumina-Forming FeCrAl Alloy after Supercritical Water Exposure: Effect of Pre-Corrosion on High-Temperature Damage Behavior

Corrosion Behavior of Oxide Dispersion Strengthened Ferritic Steels in Supercritical Water

Effect of High Flow Velocity on Corrosion Behavior of Ni Based and Ni-Fe Based Alloys in Supercritical Water Oxidation Environment

Corrosion Behavior of Ni-Based Alloys in Supercritical Water Containing High Concentrations of Salt and Oxygen

Research on the Corrosion Behavior of Nickel Base Alloy in Municipal Sludge Treated by Supercritical Water Oxidation

Preparation of Different Coatings on 316 L Stainless Steel and their Corrosion Performance in Supercritical Water

On Corrosion of Zirconium Alloy in Dissolved Oxygen Water：The Role of Cu Addition

High-resolution characterization of the internal and external oxidation of austenitic alloys in supercritical water

Effects of Ni and Cr on the high-temperature oxidation behavior and mechanisms of Co- and CoNi-base superalloys

Oxidation Processes and Involved Chemical Reactions of Corrosion-Resistant Alloys in Supercritical Water

Effect of Cr on the Microstructure and Oxidation Properties of Co-Al-W Superalloys Studied by in Situ Environmental TEM