Abstract:The CoCrFeNiAl high-entropy alloy, with varying Al compositions, was utilized as the bonding phase in this study to fabricate WC-10%CoCrFeNiAl x (where x represents the mole ratio of Al element, ranging from 0 to 1) hard alloys using the Spark Plasma Sintering method. The investigation focused on elucidating the influence mechanism of microstructure and properties of CoCrFeNiAl x high-entropy alloys on the mechanical properties of WC-10%CoCrFeNiAl x hard alloys. Isothermal oxidation testing was subsequently conducted to examine the impact of Al content on the high-temperature oxidation resistance of WC-10%CoCrFeNiAl x hard alloys. Finally, a comparison was made between the mechanical properties and high temperature oxidation resistance of WC-10%CoCrFeNiAl x hard alloys and conventional WC-6Co cemented carbide. The findings suggest that as the Al content increases, the CoCrFeNiAl x high-entropy alloy undergoes a transition from a single Face-Centered Cubic (FCC) phase to a combination of FCC and Body Centered Cubic (BCC) phases, ultimately transforming into a BCC phase. This evolution results in a gradual enhancement in hardness. The mechanical properties of WC-10CoCrFeNi hard alloy exhibit exceptional characteristics when the Al content is eliminated, with hardness, fracture toughness, and bending strength reaching 1702 MPa, 13.0 MPa·m 1/2 , and 1378 MPa respectively. As the Al content increases in WC-10%CoCrFeNiAl x hard alloys, there is a corresponding increase in hardness while fracture toughness and bending strength gradually decrease. Furthermore, an enhancement in high temperature oxidation resistance is observed. Finally, in comparison to the conventional WC-6Co hard alloy, the mechanical properties of WC-10CoCrFeNiAl x hard alloys exhibit similarity while demonstrating a significant enhancement in oxidation resistance.

Effect of Cr on the Microstructure and Oxidation Properties of Co-Al-W Superalloys Studied by in Situ Environmental TEM

In situ oxidation analysis on Co-Al-W-Ti-Ta single-crystal alloy in an environmental TEM

Effects of Ni and Cr on the high-temperature oxidation behavior and mechanisms of Co- and CoNi-base superalloys

Effect of Chromium Content on the Oxidation Behavior of a Ta Stabilized Γ’-Strengthened Polycrystalline Co-30Ni-10Al-4W-4Ti-2Ta Alloy

Microstructure and oxidation of NiCr alloys studied by analytical in situ environmental TEM

Effect of Cr on solidification structure and microhardness of Al-Ni alloy

Microstructural Modelling Solution for Complex Co Based Alloys and Coatings

Effect of Cr and W addition on the oxidation behavior of Ni–8%Al alloy at 1000 °C

Influence of Ti addition on oxidation behavior of Ni-Cr-W-based superalloys

Effect of alloying elements on the coarsening rate of γʹ precipitates in multi-component CoNi-based superalloys with high Cr content

Effect of Al content in CoCrFeNiAl x HEA on mechanical properties and high temperature oxidation resistance of WC-10%CoCrFeNiAl x hard alloy

Effect of Co distribution on the oxidation behavior of aluminide coatings in Mo-rich Ni-based single-crystal superalloy

Effect of Cr element on the microstructure and oxidation resistance of novel NiAl-based high temperature lubricating composites

Effect of Al and Cr on the oxidation behavior of nanocrystalline coatings at 1050 °C

Tailoring coating composition for the associated microstructural stability of a single-crystal superalloy: an experimental and simulation study

The Effect of Oxidation on Microstructures of a Ni-based Single Crystal Superalloy During Heat-Treatment and Simulated Service Conditions

Microstructures, Tensile Properties and Corrosion Behaviors of Fe20Cr25NiNb Stainless Steels with Different Al Contents in Supercritical Carbon Dioxide

Effect of Ti and Ta content on the oxidation resistance of Co-Ni-based superalloys

Effect of Ti and C addition on oxidation resistance of FeCoCrNiMn high entropy alloys prepared by powder metallurgy

In-situ Environmental TEM Study of Γ′-Γ Phase Transformation Induced by Oxidation in a Nickel-Based Single Crystal Superalloy

Effect of Cr Content on the High Temperature Oxidation Behavior of FeCoNiMnCrx Porous High-Entropy Alloys