Abstract:In general, Ni-based superalloys exhibit high strength, good oxidation and corrosion resistance, and good creep-resistant properties at high temperatures (HTs) because of the coherent precipitation of cuboidal.' nanoparticles into a fcc-gamma matrix induced by co-alloying of multiple elements. The present work designed a series of Ni-based superalloys based on the cluster composition formula [Al-Ni-12](Al-1 (Ti, Nb, Ta)(0.5)(Cr, Mo, W)(1.5)), with S1-CM (Cr1.0Mo0.5), S2-CW (Cr1.0W0.5), and S3-CMW (Cr0.7Mo0.4W0.4), in which the amounts of Cr, Mo, and W were changed, whereas the contents of other elements were main-tained. In addition, the effect of Cr, Mo, and W variation on the thermal stability of gamma/gamma ' coherent microstructure at HT in these superalloys was investigated. Alloy ingots were prepared by arc melting under an argon atmosphere, solid solutionized at 1300 degrees C for 15 h, and then aged at 900 degrees C for up to 500 h. Microstructural characterization and mechanical properties of these alloys in different aged states were studied by XRD, SEM, EPMA, TEM, Vickers hardness testing, and compressive testing.Result showed that all these three alloys have a high volume fraction (f > 70%) of gamma ' particles uniformly distributed in the fcc-gamma matrix. In particular, the gamma ' particle shape is ellipsoidal in S1-CM and S2-CW alloys, whereas it is cuboidal in the S3CMW alloy primarily because the latter has a more negative gamma/gamma ' lattice misfit (delta = - 0.47%) than the former (delta = - 0.25% to - 0.33%). After aging for 500 h, the morphology of gamma ' particles in each alloy has no evident change, and all of the particles have a slow coarsening rate (K = 10-18 nm(3)/s), in which the S3CMW alloy exhibits the highest gamma/gamma ' microstructural stability (the coarsening rate of gamma ' particles being K = 10.02 nm(3)/s). Moreover, the amount of second-phase precipitation near the grain boundaries in the S3CMW alloy is less than that in the former two alloys. The microhardness test results showed that the microhardness of each alloy remains almost constant with aging time, thereby indicating the thermal stability of the coherent structure. In particular, the microhardness of the S3-CMW alloy is 397-418 HV, and the room-temperature compression yield strength is 818 MPa in the 200-h-aged state.

Effect of alloying elements on the coarsening rate of γʹ precipitates in multi-component CoNi-based superalloys with high Cr content

Effect of Mo on Microstructural Characteristics and Coarsening Kinetics of Γ' Precipitates in Co–Al–W–Ta–Ti Alloys

Homogenizing Effects of Co on Multi-Scale Elemental Distribution in Ru-containing Ni-based Single Crystal Superalloys

Effects of Alloying Elements on Microstructure and Mechanical Properties of Co–Ni–Al–Ti Superalloy

Microstructure-dependent coarsening behavior of γ′ precipitates in CoNi-based superalloys

Effects of Co on Microstructure Evolution of a 4th Generation Nickel-Based Single Crystal Superalloys

Influence of Initial Microstructure on the Γ′-Coarsening Behavior in a Corrosion-Resistant Ni-based Superalloy

The Effects of Refractory Elements on Mechanical Properties in CoCrNiFe Concentrated Solid Solution Alloys Across Different Temperatures

Synergistic effects of Al and Mo on coarsening kinetics of Ni-based superalloys at 1200°C

Effects of Cr and Al/W Ratio on the Microstructural Stability, Oxidation Property and Γ′ Phase Nano-Hardness of Multi-Component Co–Ni-base Superalloys

Effect of Interactions among Elements on Diffusion Process Associated with Γ′ Coarsening in a Ni-Based Single-Crystal Superalloy

Effects of Ni, Cr and W on the Microstructural Stability of Multicomponent CoNi-base Superalloys Studied Using CALPHAD and Diffusion-Multiple Approaches

High-throughput exploration of alloying effects on the microstructural stability and properties of multi-component CoNi-base superalloys

Coarsening Evolution of gamma ' Phase and Failure Mechanism of Co-Ni-Al-Ti-Based Superalloys During Isothermal Aging

Effect of Cr/Mo/W on the Thermal Stability of Γ/γ′ Coherent Microstructure in Ni-Based Superalloys

Effect of Co on microstructural stability of the third generation Ni-based single crystal superalloys

Alloying effects and effective alloy design of high-Cr CoNi-based superalloys via a high-throughput experiments and machine learning framework

The Effect of Fe Addition on Γ′ Precipitates During Thermal Exposure in Ni-Co-based Single Crystal Superalloys

Effect of cobalt on precipitation in Fe-Cr-Co-Mo-Ni-C stainless steels

Precipitation and Coarsening Behavior of Γ′ Phase in CoNi-base Superalloy under Different Aging Treatments

Precipitate Coarsening and Its Effects on the Hot Deformation Behavior of the Recently Developed Γ'-Strengthened Superalloys