Abstract:<p>The effects of substituting W with γ′ formers (Al, Ti, Ta, Mo and Nb) on the microstructural stability of a base model alloy Co-20Ni-7Al-8W-1Ta-4Ti were studied using a high-throughput diffusion-multiple approach. A substantial amount of composition-microstructure data was obtained from a single sample, enabling deeper understanding of the alloying effects. It was found that alloy 15Al0W still contains stable γ′ phase at 1000 °C for 1000 h even with a W content of zero. However, the γ′ volume fraction of this alloy was far lower than other W-containing alloys, indicating that W plays an important role on retaining the stability of the γ′ phase. Except for Ti, substituting W with other γ′ forming elements promotes the precipitation of detrimental phases, with a potency of Nb > Ta≈Al > Mo > Ti. The Nb content should be carefully controlled due to its strong effect on inducing the precipitation of the χ phase. The literature data for W-free alloy systems were discussed in comparison to the current W-containing alloy system in order to analyze the role of W in stabilizing the γ′ phase at high temperatures. Furthermore, the γ′ strength and density of more than 300 alloys from the investigated diffusion multiple were analyzed using classic models established for Ni-base superalloys, to guide the alloy design aiming to achieve higher strength to weight ratio. The substitution of W with Ti or Al could significantly reduce the alloy density, but would also decrease the γ′ strength to some extents. These negative effects could be counterbalanced by moderate additions of Ta and Nb. This study will be helpful for the accelerated design of multi-component CoNi-base alloys to achieve light weight and high strength.</p>

Effects of Co on Microstructure Evolution of a 4th Generation Nickel-Based Single Crystal Superalloys

Homogenizing Effects of Co on Multi-Scale Elemental Distribution in Ru-containing Ni-based Single Crystal Superalloys

Effects of Cobalt on Solidification Characteristics and As-Cast Microstructure of an Advanced Nickel-Based Single Crystal Superalloys

Homogenization Effects by Co Additions to High Temperature and Low Stress Creep Performance of a 4Th-Generation Ni-based Single Crystal Superalloys

Effect of Co Addition on Solidification Velocity, Hardness and Refined Structure Transformation Mechanisms of Undercooled Ni-Cu-Co Alloys

Effect of Minor Addition of Co on Nonequilibrium Solidification of Deeply Undercooled Cu Based Alloys

Effect of alloying elements on the coarsening rate of γʹ precipitates in multi-component CoNi-based superalloys with high Cr content

Effect of Mo on microstructural stability of a 4th generation Ni-based single crystal superalloy

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Phase-field simulation of γʹ coarsening behavior in cobalt-based superalloy

Effect of Co on Solidification Characteristics and Microstructural Transformation of Nonequilibrium Solidified Cu-Ni Alloys

The Effects of Refractory Elements on Mechanical Properties in CoCrNiFe Concentrated Solid Solution Alloys Across Different Temperatures

Effects of Al content on microstructures and high-temperature tensile properties of two newly designed CoNi-base superalloys

Investigation on solidification structure evolution of deeply undercooled single-phase Ni-Cu-Co alloys

Alloying effects and effective alloy design of high-Cr CoNi-based superalloys via a high-throughput experiments and machine learning framework

Effects of Alloying Elements on the Microstructure of Precipitation Strengthened Co-based Superalloys

Effect of cobalt content on the microstructure, microtexture, and mechanical properties of W-Ni-Fe-xCo alloys during solid-phase-sintering and liquid-phase-sintering

Co effect on rapid solidification microstructure transition of highly undercooled copper alloys

High-throughput exploration of alloying effects on the microstructural stability and properties of multi-component CoNi-base superalloys

The Effects of Co on the Microstructure and Mechanical Properties of Ni-Based Superalloys Prepared via Selective Laser Melting

Comparative study of temperature-dependent oxidation and interdiffusion behavior on NiCoCrAlYHf-coated nickel-based single-crystal superalloys