Abstract:Alumina ceramic coatings are widely used because of their favorable physical and chemical stability. However, the formation of stable alpha phase alumina on metallic substrates at lower temperatures still presents technical challenges. In this work, an Cr doped Al2O3 ceramic coating was successfully fabricated on 316L stainless steel by a new cathodic micro-arc deposition (CMAD) technique using Al(NO3)3 as the precursor. We studied the effect of chromium on its phase transition from gamma to alpha as well as the underlying mechanism. Phase and chemical composition distribution, surface morphology, and photoluminescence data were characterized by X-ray diffraction (XRD), electron probe microanalysis (EPMA), a scanning electron microscope (SEM) with an energy dispersive spectroscopy (EDS), and a microscopic confocal Raman spectrometer (MCRS). The results showed that the ceramic coatings have a porous microstructure and were mainly composed of Cr doped α-Al2O3 and γ-Al2O3. This suggests that the introduction of Cr in the electrolyte solution can promote the nucleation and growth of the corundum phase of α-Al2O3. Based on the comparison of conventional heat treatment of alumina precipitates with and without Cr dopant via a sol–gel process, we proposed that the reducing atmosphere and local high sparking temperature that subsequently enhances the diffusion of defects in oxides may be contributed to this transition. This finding might provide a simple, cost efficient way to fabricate corundum alumina coatings on metallic substrates under mild temperatures without sacrifice of its mechanical properties.

Effects of Chromium on the Oxidation Performance of β-FeAlCr Coatings

Effects Of Chromium On The Oxidation Performance Of Beta-Fealcr Coatings

Oxidation Behaviour of Β-Fealcr Coating Produced by Close-Field Unbalanced Magnetron Sputter Deposition

EFFECT OF MCrAlY COATINGS ON OXIDATION RESISTANCE OF TiAl INTERMETALLICS

Cyclic Oxidation of Sputter-Deposited Nanocrystalline Fe-Cr-Ni-Al Alloy Coatings

Oxidation Behaviour of Sputter-Depositedni–cr–al Micro-Crystalline Coatings

Preparation of Al-Cr-Fe Coatings by Heat Treatment of Electrodeposited Cr/Al Composite Coatings

Oxidation Behavior of Cast Ni3Al Alloys and Microcrystalline Ni3Al+5% Cr Coatings with and without Y Doping

Effects of Heat Treatment on Structure Transformation of Cr/Al Composite Coatings

Effect of Nickel Aluminide Microcrystalline Coating on High-Temperature Oxidation Behavior of NiAl-33.5%Cr-0.5%Zr Alloy

Oxidation Resistance of Magnetron Sputter Deposited SS-Feal+zr Coatings

High Temperature Oxidation Behaviors of Al/Cr Composite Coating on Ti2AlNb Alloy

Improved Oxide Spallation Resistance of Microcrystalline Ni-Cr-Al Coatings

Effect of ultrasonic field on the friction and oxidation characteristics of FeCrAl Coatings

The Effect of Chromium on the Gamma to Alpha Phase Transition of Alumina Coating Formed on 316L SS by a Cathodic Micro Arc Deposition (CMAD) Process

The influence of Cr on the oxidation behavior of a sputtered Pt+γ' phase-equilibrium coating at 1150 °C

Initial oxidation of Fe-Al and Fe-Cr-Al alloys: Cr as an alumina booster

Aluminum concentration effect on the oxidation behavior of CrAl coatings investigated by high-throughput method

Effect of Sc on the water vapor oxidation behavior of FeCrAl alloys at 1000 °C

Studies on As-Cast Microstructure and Oxidation Behavior of the FeCrBAl Alloys at 1073 K

Effect of Al content on high-temperature oxidation behavior and failure mechanism of CrAl-coated Zircaloy