Abstract:This article presents a resolution-tunable time-to-digital converter (TDC) with a three-level structure, in which the low-level TDC employs an improved all-digital delay-locked loop (ADDLL) based on a cyclic pulse ring oscillator (CPRO) and a digital controller for detection lock state (DLS). Specifically, a bidirectional bypass transmission delay unit (BBTDU) in CPRO provides adjustable resolution with a 15 ps coarse delay step and a 3.5 ps fine delay step. Second, a data processing approach is presented to open the window to extract a 4-bit binary data of the bidirectional serial shift register line (BSSRL) in ADDLL for DLS and update the values of BSSRL at the same position of windowing, which can reduce the number of manipulated registers in BSSRL by approximately 93.7%. Then, a methodology of detecting the locking pattern between lock and unlock and selecting the fixed optimal windowing sequence to update the controlling values of BSSRL is proposed to eliminate dithering in a locked state, which can reduce the clock phase jitter when locked. Finally, the proposed TDC has been integrated into a system-on-chip (SoC) and fabricated in 65-nm CMOS technology. The measurement results implemented with a 30 MHz reference clock demonstrate that a resolution-tunable TDC with low power has been obtained. There are six configurable resolutions in all. When configured to a minimum resolution of 7.78 ps, the power consumption and the precision are 4.812 mW and 3.02 ps, respectively. While configured for a maximum resolution of 29.7 ps, the power consumption and the precision are 2.874 mW and 13.2 ps, respectively. The proposed TDC is extremely flexible and well-suited for integration into other large-scale application-specific integrated circuit (ASIC) chips to extend the application range, especially for low-frequency applications.

A 50-Ps Gated VCRO-Based TDC with Compact Phase Interpolators for Flash LiDAR

A 15ps resolution time-to-digital converter with on-chip PLL counting for LiDAR multi-object sensors.

A 49.5 Μw Multichannel Time-to-Digital Converter with 2D/3D Imaging Fusion for APD LiDAR Sensors

A 16-Channel Analog CMOS SiPM with On-Chip Front-End for D-ToF LiDAR

A 0.013mm2 3.2ns Input Range 10-bit Cyclic Time-to-Digital Converter Using Gated Ring Oscillator With Phase Domain Reset in 65nm CMOS

Design of A Picosecond Resolution Control Loop for Fine TDC Based on 0.11 Μm CMOS Process

A Wide Dynamic Range and Low Bit Error Pixel TDC Suitable for Array Application.

A 10ps 500MS/s two-channel Vernier TDC in 0.18um CMOS technology

A low-power coarse-fine time-to-digital converter in 65nm CMOS

A Resolution-Tunable Low Power Time-to-Digital Converter With an Improved ADDLL Based on a Cyclic Pulse Ring Oscillator

A 8bits, 6.2ps Resolution Two-Step Time-to-digital Converter with Set-Reset-based Arbiters and Signal Tracking Mechanism

A Low Power Tdc With 0.5ps Resolution For Adpll In 40nm Cmos

A 12bit 39ps Two-Step Time-to-Digital Converter in 40nm CMOS

High-Precision GRO-Based ROIC Adopting Sliding Scale Average Method for SPAD Array

2 Ps Time-to-Digital Converter for Frequency Synthesis in 55 Nm CMOS Technology

A Vernier Caliper Time-to-Digital Converters with Ultralow Nonlinearity in FPGAs

A Novel Time-to-Digital Converter Based on Low-Jitter Phase-Locked Loop

A CMOS Time-to-digital Converter for Multi-Voltage Threshold Method in Positron Emission Tomography

A high-resolution time-to-digital converter based on multi-phase clock implement in field-programmable-gate-array

A Vernier Time-to-Digital Converter with 1.5ps Resolution for an All-Digital Phase Locked Loop in 28nm CMOS.

A Three-Step Multi-Resolution Time-to-Digital Converter.