A 13-Bit, 12-ps Resolution Vernier Time-to-Digital Converter Based on Dual Delay-Rings for SPAD Image Sensor

Zunkai Huang,Jinglin Huang,Li Tian,Ning Wang,Yongxin Zhu,Hui Wang,Songlin Feng

DOI: https://doi.org/10.3390/s21030743

IF: 3.9

2021-01-22

Sensors

Abstract:A three-dimensional (3D) image sensor based on Single-Photon Avalanche Diode (SPAD) requires a time-to-digital converter (TDC) with a wide dynamic range and fine resolution for precise depth calculation. In this paper, we propose a novel high-performance TDC for a SPAD image sensor. In our design, we first present a pulse-width self-restricted (PWSR) delay element that is capable of providing a steady delay to improve the time precision. Meanwhile, we employ the proposed PWSR delay element to construct a pair of 16-stages vernier delay-rings to effectively enlarge the dynamic range. Moreover, we propose a compact and fast arbiter using a fully symmetric topology to enhance the robustness of the TDC. To validate the performance of the proposed TDC, a prototype 13-bit TDC has been fabricated in the standard 0.18-μm complementary metal–oxide–semiconductor (CMOS) process. The core area is about 200 μm × 180 μm and the total power consumption is nearly 1.6 mW. The proposed TDC achieves a dynamic range of 92.1 ns and a time precision of 11.25 ps. The measured worst integral nonlinearity (INL) and differential nonlinearity (DNL) are respectively 0.65 least-significant-bit (LSB) and 0.38 LSB, and both of them are less than 1 LSB. The experimental results indicate that the proposed TDC is suitable for SPAD-based 3D imaging applications.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to achieve a high - precision time - to - digital converter (TDC) in single - photon avalanche diode (SPAD) image sensors. Specifically, the paper aims to design a 13 - bit, 12 - picosecond - resolution Vernier time - to - digital converter based on a dual - delay loop to meet the requirements for a wide dynamic range and fine time resolution in 3D imaging applications. The paper proposes a pulse - width self - limiting (PWSR) delay element to improve time precision and constructs a pair of 16 - stage Vernier delay loops to effectively expand the dynamic range. In addition, a compact and fast arbiter design is also proposed, using a fully symmetric topology to enhance the robustness of the TDC. Through these designs, the paper solves the problems of low resolution, limited dynamic range, and high power consumption in traditional delay - line - loop TDCs, making the proposed TDC particularly suitable for accurate depth measurement in SPAD - based 3D imaging systems.