Abstract:Ti(C0.7,N0.3)-Mo2C–Ni cermets are fabricated by powder metallurgy methods. We systematically investigate the microstructure, fracture morphology, crack propagation mechanism, and interface characteristics of Ti(C, N)-based cermets with different Ni binder contents.The increased dissolution of carbides and carbonitrides leads to a large amount of (Mo,Ti)(C,N) solid solution precipitates, which then spontaneously nucleate, resulting in a significant increase in the content of white core-gray rim grains in the cermets with a high binder content. The increased Ni binder largely improves the flexural strength and fracture toughness of the Ti(C,N)-based cermets because of the ductile dispersion toughening. The rim-core interfaces have a superior atomic coherent relationship in all Ti(C,N)-based cermets owing to the small lattice mismatch. The lattice mismatch of the interface between the rim phase and metal binder is remarkably decreased with the increase in the binder content to construct an atomic coherent relationship. Thus, the increased Ni binder promotes atomic ordering at the interface between the ceramic grains and binder and strengthens the grain boundary. The characteristic (111) peak of nickel shifts to a larger angle due to the reduction in the Ni-based solid solution lattice distortion. Therefore, the effect of solid solution strengthening is diminished with the increase in binder content, which results in a decreased binder strength. In the Ti(C,N)-based cermets with low metal binder contents, the fracture of the grain boundary between the ceramic grains and binder is the predominant failure mechanism. The intergranular crack accompanied by crack branching is the main characteristic of crack propagation. A hybrid fracture mode of intergranular and transgranular cracks is observed in the Ti(C,N)-based cermets with a moderate binder content. As the binder content further increases, the plastic yield deformation and subsequent tearing of the metal binder are the main fracture characteristics because of grain boundary strengthening and decreased strength of the binder.

Distinguishing Contributions of Metal Binder and Ceramic Phase to Mechanical Performance of Cermets at Different Temperatures

Distinguishing Contributions of Ceramic Matrix and Binder Metal to the Plasticity of Nanocrystalline Cermets

Influence of Zrc Content on the Elevated Temperature Tensile Properties of Zrcp/W Composites

Extraordinary High-Temperature Mechanical Properties in Binder-Free Nanopolycrystalline WC Ceramic

High-temperature mechanical performance of Ru doped cermets

Mechanical behavior of cermets with different morphology of ceramic grains

Outstanding high-temperature oxidation- and wear-resistance of WC based cermets

Stress–strain Behaviors of Cermets with Various Binder Contents and Residual Thermal Stress States

Tuning microstructure for superb mechanical properties in a Ti(C,N)-(WMoTaNbTi)C-Ni/Co cermets via change sintering temperature

Microstructure, Mechanical Properties and Wear Behaviors of Ultrafine-Grain WC-Based Cermets with Different Binder Phases Fabricated by Spark Plasma Sintering

Research On Wear Behavior Of Atc Cermet Material

Effects of Residual Thermal Stress on Mechanical Behavior of Cermets with Different Grain Sizes

Dual-grained Mo2FeB2-based cermets containing WC fabricated via multi-step sintering approach: Microstructure, mechanical properties and interface characteristics

Fracture Behaviors of Ti(C, N)-based Cermets with Different Contents of Metal Binder

Crystal Defects Responsible for Mechanical Behaviors of a WC-Co Composite at Room and High Temperatures - a Simulation Study.

Excellent Tribological Properties and Unique Wear-Resistance Mechanism of Binderless Tungsten Carbide Prepared Via Two-Step Oscillatory Pressure Sintering

Influence of WC content on microstructure and mechanical properties of Mo2FeB2-based cermets fabricated by multi-step sintering

Insights into Hardening and Strengthening in Ultrafine Ti(C, N)-Based Cermets

High-temperature oxidation resistance, mechanical and wear resistance properties of Ti(C,N)-based cermets with Al0.3CoCrFeNi high-entropy alloy as a metal binder

A Review of Research Progress on Ti(C,N)-Based Cermet Binder by Intermetallic Compounds and High-Entropy Alloys

Fabrication, microstructure evolution, and mechanical properties of Ti(C,N)-HfN-WC-Ni-Mo cermets