Abstract:The silicon carbide (SiC) inverter brings great advantages to the motor drive systems of new energy vehicles; however, severe challenges to the bearings also happen. The high dc bus voltage and switching frequency of SiC inverter can increase the discharge frequency and energy when the bearing grease film collapses. As a result, the bearing suffers severe electric corrosion, and the service life of the motor drive system can be shortened. In this paper, the characteristics of common-mode voltage and bearing voltage are analyzed, firstly under space vector pulse width modulation (SVPWM). After that, the common-mode equivalent circuit model of the motor drive system is established. The frequency characteristics of bearing voltage are revealed, and the safe working area is determined. Then, the frequency characteristics of bearing voltage and current are verified based on IGBT and SiC inverters in experiments. After that, by designing a common-mode filter, the bearing voltage and current are significantly attenuated. Furthermore, the active zero state PWM (AZSPWM) is adopted to reduce the common-mode voltage from the inverter. At the same time, combined with the common-mode filter, the bearing voltage and current are further reduced. The experimental results show that the switching frequency has a decisive effect on the amplitude of bearing voltage and current. The bearing voltage can be attenuated to around half of the reference bearing voltage by using the common-mode filter and AZSPWM strategy, respectively. The combination of the common-mode filter and AZSPWM strategy can reduce the bearing voltage to around one-fourth of the reference bearing voltage, which can effectively reduce the breakdown time and discharge energy of the grease oil film.

Analysis and Suppression of Common Mode Voltage for Motor Drive in EV

Analysis and Suppression of Common Mode Voltage for SiC Inverters in Electric Vehicle Applications

Effect of Common-Mode Interference on Communication Performance of a Motor Drive System

Time-frequency Characteristics Research of Common Mode Current in PWM Motor System

Research on Analysis and Suppression Methods of the Bearing Current for Electric Vehicle Motor Driven by SiC Inverter

Extraction of Common-Mode Impedance of an Inverter-Fed Induction Motor

Analysis and Suppression of Shaft Voltage in SiC-Based Inverter for Electric Vehicle Applications

Analysis and Utilization of Common-mode Voltage in inverters for Power Supply

Common-Mode Resonance Suppression Strategy in High-Speed Compressor Drive

The Common-Mode Voltage Suppression Method for PMSM Based on Current Predictive Control

Analysis and Suppression of Common-Mode Voltage in Open-End Winding Induction Motor Drive System Fed by Dual Inverter

Modeling of Common-Mode Impedance of an Inverter-Fed Induction Motor from Online Measurement

Impact of reduced common mode voltage PWM and common mode inductor on EMI characteristics of an inverter-driven motor

Common-Mode Voltage Elimination for Variable-Speed Motor Drive Based on Flying-Capacitor Modular Multilevel Converter

Research of common-mode voltage elimination for open-end winding AC motor drive system

Suppression of Common-Mode Voltage for Matrix Converter Based on SVPWM

Research Status of Conducted Common Mode EMI Restraint Method in PWM Motor Drive System

Experimental Investigation on Electromagnetic Interference (EMI) in Motor Drive Using Silicon Carbide (SiC) MOSFET

A Soft-Switching Current-Source-Inverter-Fed Motor Drive With Reduced Common-Mode Voltage

Simulation Analysis of Common Mode Voltage Suppression Strategies for PWM Inverter

Analysis of EMI in Motor System Driven by PWM Inverter